C_IBP_2105 Questions PDF [2022] Use Valid New dump to Clear Exam [Q43-Q66]

Rate this post

C_IBP_2105 Questions PDF [2022] Use Valid New dump to Clear Exam

Passing SAP C_IBP_2105 Exam Using 2022 Practice Tests

SAP C_IBP_2105 Certification Exam Topics:

Topic Areas	Topic Details, Courses, Books
General Configuration of a Planning Area > 12%	Display, create, copy, edit, check, and activate a planning area. IBP200 (SAP IBP OD 2105)
Analytics and Reporting < 8%	Define and view information with user-defined charts and dashboards. IBP200 (SAP IBP OD 2105) IBP300 (SAP IBP OD 2105)
Demand Planning 8% – 12%	Create statistical forecast using historical data with basic methods. IBP200 (SAP IBP OD 2105) IBP600 (SAP IBP OD 2105)
Planning Operators & Application Jobs > 12%	Use Planning Operators. IBP300 (SAP IBP OD 2105)

Q43. Which one of the following values can you use in disaggregation expressions?

KF1 (Calculated) + Attribute

If (Attribute)=0

KF1 (Stored) + KF2 (Stored) + Attribute

KF1 (Stored) + Helper KF

Q44. Why would you set up a cascading filter in the planning view? Note: There are 2 correct Answers to this question.

To filter using attributes that have a large number of values

To filter attributes based on other attribute filters

To filter attributes based on specific values

To filter data in an Application Job template

Q45. You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to configuration of realignment steps? Note: There are 2 correct Answers to this question.

The name of the realignment step should be no longer than 20 characters.

The number of steps in realignment run is limited to 255.

The realignment step status must be set to Approved for it to be executed.

If a realignment step fails, subsequent steps are not processed.

Q46. Which of the following configuration options are part of the new key figure creation process? Note:
There are 3 correct Answers to this question.

Hiding or displaying totals for the key figure

Setting disaggregation logic for the key figure

Setting permitted planning levels

Enabling fixing for the key figure

Enabling planning notes for the key figure

Q47. Which features apply to quota violations modeled with the optimizer?

Min and Max Quotas have to be the same as sourcing ratios.

Quotas require sourcing ratios to be maintained.

Quota violation cost is maintained as an attribute as a key figure.

Quotas can be modeled for sourcing location, production, and consensus demand.

Q48. You need to create time periods for the time profile in a planning are
a. What should you be aware of when executing the Create Time Periods application job?

The planning area with this time profile must be activated so that the application job can proceed.

This application job cannot be scheduled for immediate start.

A time profile has to be activated so that the application job can proceed.

This application job can be run for multiple time profiles at once.

Q49. Which of the following modes can you use when creating a constrained plan? Note: There are 2 correct Answers to this question.

Profit maximization

Resource maximization

Delivery maximization

Production maximization

Q50. While modeling costs for optimization, you are conscious of the necessity to respect inventory targets and meet demands in the short term. Which of the following are valid relationships between costs you must adhere to? Note: There are 2 correct Answers to this question.

Target inventory violation cost should be greater than inventory holding cost rate.

Target inventory violation cost should be less than max inventory violation cost.

Target inventory violation cost should be greater than discount for demand lateness.

Target inventory violation cost should be less than transportation cost rate.

Q51. Which library is used by the forecasting engine for the demand sensing algorithm?

Demand library

Heuristics library

Supply chain algorithm library

Predictive analytics library

Q52. Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.

New instances of templates allow for re-use of the same processes again.

Each step depicted in the template can have tasks associated with it.

The number of steps in a process template is the same for all implementations.

All process templates are assigned to dashboards.

Q53. You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed? Note: There are 2 correct Answers to this question.

Prioritization of demand elements one by one is achieved by heuristics.

Push and Pull production models are used by the optimizer.

Finite heuristics can achieve demand prioritization and pegging.

Planning results can be generated faster by the optimizer.

Q54. Which SAP IBP planning operator can be run to delete planning objects in a certain version?

Purge Non-Confirming Data

Purge Key Figure Data Outside Planning Area Planning Horizon

Purge Key Figure Data

Purge Master Data

Q55. What are S&OP operator (optimizer) parameters associated with demand fair share?

Number of fair share segments. Maximum days of coverage. Number of fair share segments late delivery

Number of fair share segments. Additional tiering costs (default). Number of fair share segments late delivery

Number of fair share segments. Maximum inventory. Additional tiering costs (default)

Number of fair share segments. Additional tiering costs (default). Target inventory violation cost

Q56. You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints? Note: There are 2 correct Answers to this question.

Model adjusted transport receipts.

Enter transportation lead times.

Set minimum and maximum lot sizes.

Create product substitutions.

Q57. What type of key figure requires a planning level to have all attributes as roots?

The attribute transformation key figure, such as PERIODID1

The special key figure marked as an aggregate key figure

The time independent key figure, such as FCSTMAPE

The conversion key figure, such as exchange rate

Q58. How can you make charts and dashboards private?

Enable the relevant settings in the global configuration parameters.

Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications.

Set restrictions for charts in the Permission filter application.

Choose only relevant key figures and filters in the Analytics Advanced application.

Q59. Which calculations can be processed within the pre-processing step in the forecasting model? Note:
There are 2 correct Answers to this question.

Correlations can be evaluated.

Promotion Sales Lift Ups can be deleted.

Rounding can be executed for the sales history.

Missing Values can be substituted.

Q60. Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are
2 correct Answers to this question.

Manual creation of feasible constrained plans

Finite resource planning

A basic demand planning process

An advanced demand planning process

Q61. Which of the following are the key features of SAP Supply Chain Control Tower? Note: There are 2 correct Answers to this question.

Ability to create a feasible plan

Ability to use task and case management

Ability to balance demand and supply and attain financial targets

Ability to create smart alerts

Q62. You are working with the inventory optimization process and you want to use a what-if analysis. What parameters are assessed by this analysis? Note: There are 2 correct Answers to this question.

Number of planning combinations

Service levels

Changed variability

Capacity consumption

Q63. You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question.

SOURCELOCATION

LOCATIONFR

SOURCECUSTOMER

SOURCEPRODUCTION

Q64. You created a key figure and want to add calculations. Which of the following rules do you consider?
Note: There are 2 correct Answers to this question.

Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.

The calculation chain for a key figure must always result in a calculated key figure.

Key figures can be calculated across different planning levels.

All key figure calculations have calculation inputs, which can be marked as stored or calculated.

Q65. Which of the following approaches could you take to reduce run times of an optimizer? Note: There are
2 correct Answers to this question.

Use a subnetwork ID to reduce the size of the problem.

Increase the use of incremental lot size beyond the frozen horizon.

Split into multiple planning areas to support weekly vs. daily planning needs.

Avoid using telescopic time buckets.

Q66. Which of these conditions must be met to create a Local Member key figure?

Use Excel Cell References in Report Editor is selected.

A key figure is created in the Planning Area app.

Activate Local Member Recognition is selected.

A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.

Loading …

C_IBP_2105 Study Guide Brilliant C_IBP_2105 Exam Dumps PDF: https://www.actualcollection.com/C_IBP_2105-exam-questions.html

SAP C_IBP_2105 Certification Exam Topics:

Leave a comment Cancel reply