VALID 300-410 Exam Dumps For Certification Exam Preparation [Q364-Q383]

5/5 - (2 votes)

VALID 300-410 Exam Dumps For Certification Exam Preparation

300-410 Dumps PDF 2026 Strategy Your Preparation Efficiently

Cisco 300-410 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Infrastructure Automation	10%	– Configure and verify network management using Ansible – Describe configuration management tools – Describe REST API features and use cases
Topic 2: Infrastructure Services	15%	– Configure and verify NetFlow and Flexible NetFlow – Describe Catalyst Center Assurance – Configure and verify SNMP – Configure and verify logging and syslog – Configure and verify DHCP – Configure and verify IP SLA
Topic 3: Infrastructure Security	20%	– Configure and verify AAA – Configure and verify Unicast Reverse Path Forwarding – Configure and verify ACLs for IPv4 and IPv6 – Implement IPv6 first-hop security features – Configure Control Plane Policing
Topic 4: VPN Services	20%	– Implement and troubleshoot site-to-site VPNs – Implement and troubleshoot GETVPN – Describe MPLS and MPLS VPN architectures – Implement and troubleshoot DMVPN
Topic 5: Layer 3 Technologies	35%	– Troubleshoot administrative distance – Describe Bidirectional Forwarding Detection – Troubleshoot EIGRP and OSPF – Configure and verify policy-based routing – Troubleshoot loop prevention mechanisms – Configure and troubleshoot BGP – Troubleshoot redistribution between routing protocols – Troubleshoot route maps and route filtering – Configure and verify VRF-Lite

NO.364 Refer to the exhibit.

An engineer has configured DMVPN on a spoke router. What is the WAN IP address of another spoke router within the DMVPN network?

172.18.46.2

192.168.1.4

172.18.16.2

192.168.1.1

From the output we can see there are 2 NHRP Peers. The first one with the NBMA Address of
172.18.16.2 and the “Attribute” (Attrb) of Static (S) so we can deduce it is the Hub device.
Therefore the second one must be the remaining Spoke device with the attribute of Dynamic (D).

— > S – Static, D – Dynamic, I – Incomplete
N – NATed, L – Local, X – No Socket
# Ent — > Number of NHRP entries with same NBMA peer
NHS Status: E — > Expecting Replies, R — > Responding, W — > Waiting UpDn Time — > Up or Down Time for a Tunnel
==
Interface: Tunnel1, IPv4 NHRP Details
Type:Spoke, NHRP Peers:2,
# Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb
—– ————— ————— —– ——– —–
1 44.44.44.4 192.168.100.254 UP 00:03:40 S
1 12.12.12.2 192.168.100.2 UP 00:03:20 D

NO.365 Refer to the exhibit. Why is user authentication being rejected?

The TACACS+ server expects “user” but the NT client sends “domainuser”

The TACACS+ server refuses the user because the user is set up for CHAP

The TACACS+ server is down and the user is in the local database

The TACACS+ server is down and the user is not in the local database

In the output we noticed that the “Destination unreachable; gateway or host down” notification
while trying to communicate with the TACACS+ server. This means the TACACS+ server went
down. So the next authentication method is via the local database (“Method=LOCAL”). But the
authentication was failed again because of bad username, bad password or both.
Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-
access-control-system-tacacs-/13864-tacacs-pppdebug.html

NO.366 An engineer creates a Cisco DNA Center cluster with three nodes, but all the services are
running on one host node.
Which action resolves this issue?

Restore the link on the switch interface that is connected to a cluster link on the Cisco DNA
Center

Click the master host node with all the services and select services to be moved to other hosts

Enable service distribution from the Systems 360 page.

Click system updates, and upgrade to the latest version of Cisco DNA Center.

NO.367 Which mechanism provides traffic segmentation within a DMVPN network?

RSVP

BGP

MPLS

iPsec

To use the 2547oDMPVN–Traffic Segmentation Within DMVPN feature you must configure
Multiprotocol Label Switching (MPLS) by using the mpls ip command.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-16/sec-
conn-dmvpn-xe-16-book/sec-conn-dmvpn-dmvpn.html

NO.368 Refer to the exhibit.

Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64?

Option A

Option B

Option C

Option D

NO.369 Refer to the exhibit.

Why is the remote NetFlow server failing to receive the NetFlow data?

The flow exporter is configured but is not used.

The flow monitor is applied in the wrong direction.

The flow monitor is applied to the wrong interface.

The destination of the flow exporter is not reachable.

NO.370 Refer to the exhibit.

Refer to the exhibit An engineer must connect the Reno and Detroit spokes using DMVPN phase 2 Hub tunnel configuration is

Which configuration accomplishes the task?

Option A

Option B

Option C

Option D

NO.371 What does the PE router convert the Ipv4 prefix to within an MPLS VPN?

It is defined in RFC 3038 and 3039.

It requires MPLS Traffic Engineering.

It advertises labels per Forwarding Equivalence Class.

It must use Resource Reservation Protocol.

NO.372 An engineer needs dynamic routing between two routers and is unable to establish OSPF
adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is
EXSTART/EXCHANGE. Which action should be taken to resolve this issue?

match the passwords

match the hello timers

match the MTUs

match the network types

NO.373 :584

Reler Iothe exhibit The engineer is trying to transfer the newIOSfile to the router R3 but is getting an error Which configuration achieves the file transfer?

Option A

Option B

Option C

Option D

NO.374 Refer to the exhibit.

Refer to the exhibit. An engineer configured NetFlow on R1, but the flows do not reach the NMS server from R1. Which configuration resolves this Issue?

Option A

Option B

Option C

Option D

NO.375 Refer to the exhibit.

A company is evaluating multiple network management system tools. Trending graphs generated by SNMP data are returned by the NMS and appear to have multiple gaps. While troubleshooting the issue, an engineer noticed the relevant output. What solves the gaps in the graphs?

Remove the exceed-rate command in the class map.

Remove the class map NMS from being part of control plane policing.

Configure the CIR rate to a lower value that accommodates all the NMS tools

Separate the NMS class map in multiple class maps based on the specific protocols with appropriate CoPP actions

NO.376 Refer to the exhibit.

An engineer identifier a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 switch?

no spanning-tree uplinkfast

spanning-tree loopguard default

spanning-tree backbonesfast

spanning-tree portfast bpduguard

https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and management
/dnacenter/tech_notes/b_dnac_sda_lan_automation_deployment.html

NO.377 Drag and drop the MPLS VPN device types from me left onto the definitions on the right.

NO.378 Which option is the best for protecting CPU utilization on a device?

fragmentation

COPP

ICMP redirects

ICMP unreachable messages

NO.379 Refer to the exhibit.

A prefix list is created to filter routes inbound to an EIGRP process except for network 10 prefixes After the prefix list is applied no network 10 prefixes are visible in the routing table from EIGRP. Which configuration resolves the issue?

ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9.

ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32

ip prefix-list EIGRP seq 5 permit 10.0.0.0/8 ge 9 no ip prefix-list EIGRP seq 20 permit 10.0.0.0/8

ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9 ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32

NO.380 Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.

Explanation:

HTTP and HTTPs run on TCP port 80 and 443, respectively and we have to remember them.
Syslog runs on UDP port 514 while NTP runs on UDP port 123 so if we remember them we can find out the matching answers easily. But maybe there is some typos in this question as 2001:d88:800:200c::c/126 only ranges from 2001:d88:800:200c:0:0:0:c to 2001:d88:800:200c:0:0:0:f (4 hosts in total). It does not cover host
2001:0D88:0800:200c::1f. Same for 2001:D88:800:200c::e/126, which also ranges from 2001:d88:800:200c:
0:0:0:c to 2001:d88:800:200c:0:0:0:f and does not cover host 2001:0D88:0800:200c::1c.

NO.381 Refer to the exhibit. An engineer must configure EIGRP between R1 and R2 with no summary route. Which configuration resolves the issue?

NO.382 Refer to the exhibit.

A network administrator logs into the router using TACACS+ username and password credentials, but the administrator cannot run any privileged commands Which action resolves the issue?

Configure TACACS+ synchronization with the Active Directory admin group

Configure the username from a local database

Configure full access for the username from TACACS+ server

Configure an authorized IP address for this user to access this router

NO.383 Refer to the exhibit.

Network operations cannot read or write any configuration on the device with this configuration from the operations subnet. Which two configurations fix the issue? (Choose two.)

Configure SNMP rw permission in addition to community ciscotest.

Modify access list 1 and allow operations subnet in the access list.

Modify access list 1 and allow SNMP in the access list.

Configure SNMP rw permission in addition to version 1.

Configure SNMP rw permission in addition to community ciscotest 1.

Loading …

Latest Verified & Correct 300-410 Questions: https://www.actualcollection.com/300-410-exam-questions.html

Cisco 300-410 Exam Syllabus Topics:

Leave a comment Cancel reply