[Jul-2022] HPE6-A75 exam torrent HP study guide [Q20-Q39]

Rate this post

[Jul-2022] HPE6-A75 exam torrent HP study guide

Use Valid New HPE6-A75 Test Notes & HPE6-A75 Valid Exam Guide

HP HPE6-A75 Exam Syllabus Topics:

Topic	Details
Topic 1	Configure and validate Aruba WLAN secure employee and guest solutions Given the customer requirements, determine the component details and document the high-level design
Topic 2	Given an outline of a customer’s needs, determine the information required to create a solution Enable multicast DNS features to support discovery across VLAN boundaries
Topic 3	Given a scenario, evaluate the customer requirements to identify gaps per a gap analysis Given a customer scenario, design and document the logical and physical network solutions
Topic 4	Given a scenario with an identified security issue, determine the remediation actions Given a scenario, translate the business needs of the environment into technical customer requirements
Topic 5	Given a customer scenario, explain how a specific technology or solution would meet the customer requirements Explain Remote Access architectures and how to integrate the architectures
Topic 6	Given a scenario, predict the outcome based on the changes to the security configuration Integrate components of the Aruba Mobile First Architecture

NEW QUESTION 20
An administrator deploys an AP at a branch office. The branch office has a private WAN circuit that provides connectivity to a corporate office controller. An Ethernet port on the AP is connected to a network storage device that contains sensitive information. The administrator is concerned about sending this traffic in clear-text across the private WAN circuit.
What can the administrator do to prevent this problem?

Redirect the wired port traffic to an AP-to-controller GRE tunnel.

Convert the campus AP into a RAP.

Enable AP encryption for wired ports.

Enable IPSec encryption on the AP’s wired ports.

NEW QUESTION 21
Refer to the exhibit.

Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?

The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.

The device will be disconnected from and reconnected to the network after Onboarding is completed.

The device’s onboard authorization request will be denied.

The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP-TLS authentication is performed.

After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.

NEW QUESTION 22
Which statement is true about the databases in ClearPass?

Entries in the guest user database do not expire.

A Static host list can only contain a list of IP addresses.

Entries in the guest user database can be deleted.

Entries in the local user database cannot be modified.

The endpoints database can only be populated by manually adding MAC addresses to the table.

NEW QUESTION 23
Refer to the exhibit.

Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue. The network administrator sees that both switches show this interface as up. The administrator sees the output shown in the exhibit on Switch-1.
What is a typical issue that could cause this output?

a hardware issue, such as a broken cable

asymmetric routing introduced by a routing configuration error

an issue with queuing, caused by mismatched QoS settings

mismatched IP addresses on the VLAN for the link

NEW QUESTION 24
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company’s DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?

Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.

Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.

Have the MultiZone APs initially boot from the standalone controller in the data zone.

Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.

NEW QUESTION 25
Refer to the exhibit.

An AD user’s department attribute is configured as *HR”. The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?

Executive

iOS Device

Vendor

Remote Employee

HR Local

NEW QUESTION 26
Refer to the exhibit.

An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?

Deny Access Profile

Onboard Post-Provisioning – Aruba

Onboard Device Repository

Onboard Pre-Provisioning – Aruba

NEW QUESTION 27
Refer to the exhibit.

Based on the configuration of me create_user form shown, which statement accurately describes the status?

The email field will be visible to guest users when they access the web login page.

The visitor_company field will be visible to operators creating the account.

The visitor_company field will be visible to the guest users when they access the web login page.

The visitor_phone field will be visible to the guest users in the web login page.

The visitor_phone field will be visible to operators creating the account.

NEW QUESTION 28
Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).
* Each campus is responsible to purchase its own AP licenses.
* There are 900 AP licenses deployed in the global pool
* There are three dedicated pools.
* From the global pool, 300 AP licenses are assigned to each dedicated pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses m CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?

Allow CampusA to share from the CampusC pool.

Add 100 more AP licenses and assign them to the CampusA pool.

Move 100 licenses from the CampusC pool to the global pool.

Add 100 more AP licenses to the global pool.

NEW QUESTION 29
Refer to the exhibit.

Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

Deny Access

Employee VLAN

Internet VLAN

Full Access VLAN

NEW QUESTION 30
OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system. The administrator also needs the router ID to De stable and available, even if some links on the switch fail.
What should the administrator do?

Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest ID.

Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface.

Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system.

Configure 10.0.0.1 as a secondary IP address on the switch 00BM poet.

NEW QUESTION 31
Refer to the exhibit.

A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?

The standby uses its own port in the link aggregation to forward the fabric.

The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.

The standby uses the typical load sharing algorithm, and it might select either its port or the commander’s port.

The standby selects the port on the designated forwarder for the aggregation.

NEW QUESTION 32
An administrator deploys Aruba Mobility Controller 7005s to a company’s branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.
Which controller command should the administrator use to implement this policy?

no console enable

no mgmt-user console

mgmt-user console-block

console disable

NEW QUESTION 33
Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

Only the attribute values of department and memberOf can be used in role mapping policies.

The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.

Only the attribute value of company can be used in role mapping policies, not the other attributes.

The attribute values of department and memberOf are directly applied as ClearPass roles.

Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.

NEW QUESTION 34
in a VPN that uses certificate-based authentication, which component must be configured on the Mobility Master (MM) to allow a RAP to successfully connect to a Mobility Controller (MC)

RAP VPN username and password

WLAN and new RAP group

RAP IPSec pre-shared key

RAP whitelist

NEW QUESTION 35
An administrator wants to use Airwave to manually add devices on the network. Where should the administrator perform this action?

in Device Setup

in Groups

in AMP Setup

in Devices

NEW QUESTION 36
An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.
What must the administrator do to solve this problem?

Enable CPSec in the MultiZone profile for both the primary and data zone.

Enable MultiZone booting in the MultiZone AP apboot configuration mode.

Add the MultiZone APs to the data zone’s CPSec whitelist.

Use different AP Group names for the two zones.

NEW QUESTION 37
Refer to the exhibit.

When configuring a Web Login Page in ClearPass Guest, the information shown is displayed. What is the Address field value ‘securelogin.arubanetworks.com’ used for?

for ClearPass to send a TACACS+ request to the NAD

for appending to the Web Login URL, before the page name

for the client to POST the user credentials to the NAD

for ClearPass to send a RADIUS request to the NAD

for appending to the Web Login URL, after the page name.

NEW QUESTION 38
Refer to the exhibit.

Based on the configuration for the client’s certificate private key as shown, which statements accurately describe the settings? (Select two.)

More bits in the private key will increase security.

The private key for TLS client certificates is not created.

The private key is stored in the ClearPass server.

More bits in the private key will reduce security.

The private key is stored in the user device.

NEW QUESTION 39
What are Operator Profiles used for?

to enforce role based access control for Aruba Controllers

to enforce role based access control for ClearPass Policy Manager admin users

to enforce role based access control for ClearPass Guest Admin users

to assign ClearPass roles to guest users

to map AD attributes to admin privilege levels in ClearPass Guest

HPE6-A75 Exam questions and answers: https://www.actualcollection.com/HPE6-A75-exam-questions.html

HP HPE6-A75 Exam Syllabus Topics:

Leave a comment Cancel reply