CCTE Real Exam Questions and Answers FREE 156-585 Updated on Apr 17, 2023 [Q22-Q40]

Rate this post

CCTE 156-585 Real Exam Questions and Answers FREE Updated on Apr 17, 2023

156-585 Ultimate Study Guide – ActualCollection

The CheckPoint 156-585 exam covers a wide range of topics related to troubleshooting Check Point security solutions, including network security, firewall configuration, VPN troubleshooting, and advanced security features. Successful candidates will be able to identify and troubleshoot problems with Check Point security solutions, as well as develop effective solutions to prevent future issues.

NO.22 Which of the following is contained in the System Domain of the Postgres database?

Saved queries for applications

Configuration data of log servers

Trusted GUI clients

User modified configurations such as network objects

NO.23 PostgreSQL is a powerful, open source relational database management system Check Point offers a command for viewing the database to interact with Postgres interactive shell Which command do you need to enter the PostgreSQL interactive shell?

psql_client cpm postgres

mysql_client cpm postgres

psql_c!ieni postgres cpm

mysql -u root

NO.24 The two procedures available for debugging in the firewall kernel are
i fw ctl zdebug
ii fw ctl debug/kdebug
Choose the correct statement explaining the differences in the two

(i) Is used for general debugging, has a small buffer and is a quick way to set kernel debug flags to get an output via command line whereas (11) is useful when there is a need for detailed debugging and requires additional steps to set the buffer and get an output via command line

(i) is used to debug the access control policy only, however (n) can be used to debug a unified policy

(i) is used to debug only issues related to dropping of traffic, however (n) can be used for any firewall issue including NATing, clustering etc.

(i) is used on a Security Gateway, whereas (11) is used on a Security Management Server

NO.25 You are upgrading your NOC Firewall (on a Check Point Appliance) from R77 to R80 30 but you did not touch thesecuritypolicy After the upgrade you can’t connect to the new R80 30 SmartConsole of the upgraded Firewall anymore What is a possible reason for this?

new new console port is 19009 and a access rule ts missing

the license became invalig and the firewall does not start anymore

the upgrade process changed the interfaces and IP adresses and you have to switch cables

the IPS System on the new R80.30 Version prohibits direct Smartconsole access to a standalone firewall

NO.26 The customer is using Check Point appliances that were configured long ago by third-party administrators. Current policy includes different enabled IPS protections and Bypass Under Load function. Bypass Under Load is configured to disable IPS inspections of CPU and Memory usage is higher than 80%. The Customer reports that IPS protections are not working at all regardless of CPU and Memory usage.
What is the possible reason of such behavior?

The kernel parameter ids_assume_stress is set to 0

The kernel parameter ids_assume_stress is set to 1

The kernel parameter ids_tolerance_no_stress is set to 10

The kernel parameter ids_tolerance_stress is set to 10

NO.27 What is the best way to resolve an issue caused by a frozen process?

Reboot the machine

Restart the process

Kill the process

Power off the machine

NO.28 Which of the following daemons is used for Threat Extraction?

scrubd

extractd

tex

tedex

NO.29 You are running R80.XX on an open server and you see a high CPU utilization on your 12 CPU cores You now want to enable Hyperthreading to get more cores to gain some performance. What is the correct way to achieve this?

Hyperthreading is not supported on open servers, on on Check Point Appliances

just turn on HAT in the bios of the server and boot it

just turn on HAT in the bios of the server and after it has booted enable it in cpconfig

in dish run set HAT on

NO.30 Vanessa is reviewing ike.elg file to troubleshoot failed site-to-site VPN connection After sending Mam Mode Packet 5 the response from the peer is PAYLOAD-MALFORMED” What is the reason for failed VPN connection?

The authentication on Phase 1 is causing the problem.
Pre-shared key on local gateway encrypted by the hash algorithm created in Packet 3 and Packet 4 doesn’t match with the hash on the peer gateway generated by encrypting its pre-shared key

The authentication on Phase 2 is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm created in Packets 1 and 2 doesn’t match with the hash on the peer gateway generated by encrypting its pre-shared key

The authentication on Quick Mode is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm created in Packets 3 and 4 doesn’t match with the hash on the peer gateway generated by encrypting its pre-shared key

The authentication on Phase 1 is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm doesn’t match with the hash on the peer gateway generated by encrypting its pre-shared key created in Packet 1 and Packet 2

NO.31 Your users have some issues connecting Mobile Access VPN to the gateway. How can you debug the tunnel establishment?

in the file $CVPNDIR/conf/httpd.conf change the line loglevel .. To LogLevel debug and run cvpnrestart

run vpn debug truncon

run fw ctl zdebug -m sslvpn all

in the file $VPNDIR/conf/httpd.conf the line Loglevel .. To LogLevel debug and run vpn restart

NO.32 What table does the command “fwaccel conns” pull information from?

fwxl_conns

SecureXLCon

cphwd_db

sxl_connections

NO.33 What are the main components of Check Point’s Security Management architecture?

Management server, management database, log server, automation server

Management server, Security Gateway. Multi-Domain Server, SmartEvent Server

Management Server. Log Server. LDAP Server, Web Server

Management server Log server, Gateway server. Security server

NO.34 What are four main database domains?

System, User, Global, Log

System, User, Host, Network

System, Global, Log, Event

Local, Global, User, VPN

NO.35 Which Daemon should be debugged for HTTPS Inspection related issues?

FWD

HTTPD

WSTLSO

VPND

NO.36 Which of the following is contained in the System Domain of the Postgres database?

Saved queries for applications

Configuration data of log servers

Trusted GUI clients

User modified configurations such as network objects

NO.37 What is the benefit of running “vpn debug trunc over “vpn debug on”?

“vpn debug trunc” purges ike.elg and vpnd elg and creates limestarnp while starting ike debug and vpn debug

“vpn debug trunc*truncates the capture hence the output contains minimal capture

“vpn debug trunc* provides verbose capture

No advantage one over the other

NO.38 Some users from your organization have been reported some connection problems with CIFS since this morning. You suspect an IPS Issue after an automatic IPS update last night. So you want to perform a packet capture on uppercase I only directly after the IPS module (position 4 in the chain) to check if the packets pass the IPS. What command do you need to run?

fw monitor -ml -pl 5 -e <filterexpression>

fw monitor -pi 5 -e <filterexpression>

tcpdump -eni any <filterexpression>

fw monitor -pl asm <filterexpression>

NO.39 Where do Protocol parsers register themselves for IPS?

Passive Streaming Library

Other handlers register to Protocol parser

Protections database

Context Management Infrastructure

NO.40 What are some measures you can take to prevent IPS false positives?

Exclude problematic services from being protected by IPS (sip, H 323, etc )

Use IPS only in Detect mode

Use Recommended IPS profile

Capture packets. Update the IPS database, and Back up custom IPS files

Loading …

What is the CheckPoint 156-585 Exam?

The CheckPoint 156-585 Certification Exam is a commonly administered exam that will test your knowledge and abilities in the field of information security. A certification from the International Information System Security Certification Consortium (ISC2) is a globally recognized certification. This program has been proposed, developed, and reviewed by leading experts and verified topic specialists in the information security industry.

Ultimate Guide to Prepare 156-585 Certification Exam for CCTE: https://www.actualcollection.com/156-585-exam-questions.html

What is the CheckPoint 156-585 Exam?

Leave a comment Cancel reply