New 2023 Guaranteed Success with ActualCollection NCS-Core Dumps Nutanix PDF Questions [Q91-Q110]

Rate this post

New 2023 Guaranteed Success with ActualCollection NCS-Core Dumps Nutanix PDF Questions

Exceptional Practice To Nutanix Certified Services Core Infrastructure Professional Pass the First Time

Q91. A consultant is deploying a two-node cluster at a remote branch office.
Which component must be available to complete cluster configuration?

Prism Central

Witness VM

Remote Site

Protection Domain

Q92. Which two components must be identified to validate that software compatibility requirements are met for Nutanix Cluster Installation? (Choose two.)

Guest OS

AOS

Firmware

Hypervisor

Q93. An administrator is responsible for the following Nutanix Enterprise Cloud environment:
* A central datacenter with a 20-node cluster with 1.5PB of storage
* Five remote sites each with a 4-node cluster with 200TB storage
The remote sites are connected to the datacenter via 1GB links with an average latency of 6 ms RTT. What is the minimum RPO the administrator can achieve for this environment?

0 minutes

15 minutes

1 hour

6 hours

Q94. Anadministrator is notified that a bare metal database server is down. This database server is being served storage using a Nutanix Volume Group. Upon investigating, the administrator finds that the disks in the database server that map to the vDisks in thevolume group have gone offline.
What is causing this issue?

The Volume Group Load Balancer has been disabled.

Port 9443 is blocked in the server firewall.

Port 3260 has been blocked in the server firewall.

A CVM serving the Volume Group has gone offline.

Q95. A consultant deploys a four-node VMware ESXi cluster and vCenter server. An HA/DRS cluster is configured for all four nodes. The customer deploys five new VMs on the cluster.
During the knowledge Transfer, a network cable on one node is removed to demonstrate HA and migration of the VMs to another host. In the HA/DRS cluster settings, the VM Restart Priority for all CVMs is set to Disabled. The customer observes warnings that the CVM on the ejected host is no longer powered on.
Which ESXi HA/DRS cluster setting is missing?

Enable EVC for the cluster.

Disable VM Monitoring on all CVMs.

Disable Automation Level on all CVMs.

Enable Host Monitoring.

Q96. An administrator is updating disk firmware using LCM and receives the following message:
“there have been 10 or more cluster services restarts within 15 minutes in the Controller VM” The message appears as each drive is upgraded.
What is the reason this message isbeing generated?

A node has been rebalanced

A drive has been reformatted

A node has been rebooted

A drive has been ejected

Q97. After uploading a hypervisor ISO during the Foundation process, a consultant sees a message that the MD5 sum for the hypervisor is not found in the Whitelist file.
Which step should the consultant take next to resolve this issue?

Download the hypervisor ISO again from the vendor website.

Restart the Foundation process and upload the hypervisor again.

Download the latest hypervisor ISO whitelist file from Nutanix portal.

Check the hypervisor version in the Nutanix Compatibility Matrix.

Q98. An administrator deletes a large amount of data from a Volume Group presented to a Linux VM. The administrator notices that the deleted data has not been reclaimed as usable storage.
Whataction should be taken to reclaim the storage capacity?

Shrink the Volume Group that is associated with the Linux VM

Unmount the Volume Group and then Remount the Volume Group

Enable the unman operation on the Linux VM

Run Defrag on the Linux VM

Q99. A consultant is planning a new cluster installation and needs to locate the Shared IPMI port for each of the specific nodes that the customer has bought.
Which Support Portal location contains the document that would identify the port?

Solutions Documentation

Hardware Replacement Documentation

Software Documentation

Knowledge Base

Q100. After the migration, some SQL queries take longer to execute than prior to migration.
The following SQL best practices were applied while creating the SQL VM on Nutanix:
*8 vDisks per SQL server VM
*Database and Log files on separate vDisk
*2 TempDB database drives and 1 TempDB log drive
What should the administrator to do improve the SQL Server performance?

Redistribute existing data by creating additional database file and enable autogrowth

Create multiple TempDB data files and enable autogrowth

Create multiple SQL log files and disable autogrowth

Redistribute existing data by creating additional database files and disable autogrowth

Q101. An administrator is supporting a business critical environment and deploys metro availability to achieve a zero data loss configuration. The two clusters are connected by a 1GbE connection. A new workload is going to be deployed to this cluster. This workload requires a sustained 150MB/S of write throughput and 20MB/s of read throughput.
Which change must be made to deploy the workload successfully on this cluster?

The bandwidth must be increased tosupport this workload.

The workload must be configured to read at greater than 12.5MB/S.

The replication frequency must be less than 60 minutes.

Zero data loss nearsync must be used to support this workload.

Q102. An administrator needs to configure snapshots for DRscenarios. The databases get refreshed on Friday nights regularly. The search service application re-indexes the new application on Saturday nights regularly. The remaining front-end and middle tier VMs are static but do get minor version updates weekly.
The administrator needs to have 2 weeks of daily snapshots for all the VMs in an app group and 2 weeks application consist local snapshots only on Fridays, Saturdays and Sundays on the same group of VMs.
Which two options should the administrator use to configure snapshots?

Create a schedule in a protection domain for all applicable VMs to snap daily with application consistency enabled with 6 days of retention and with no application consistency and 14 days local retention.

Create two consistency groups in a protection domain, one for front-end and middle tier apps with no application consistency, one for database and Search apps with application consistency, and apply the correct schedule to both groups.

Create one protection domain for all VMsin an application group with scheduled daily non-application consistent snapshots and another protection domain for all VMs in an application group with scheduled Friday. Saturday, Sunday application consistent snapshots.

Create a protection domain forall VMs

Q103. The following alert appears on the file server alerts tab in the file server dashboard:

Which two events can generate this alert? (choose two)

A three-node dusterhosting the file server is undergoing AOS upgrade.

A node failed in a three-node cluster.

A Nutanix file with four hie server VMs is deployed on a three-node duster.

A node is set to the maintenance mode in a three node cluster.

Q104. For several days, an administrator notices the following alerts:
* CVM NIC Speed Low Warning Alerts
* Warning Alerts of CVM NIC not performing at optimal speed
* CVM is disconnected from the network Critical Alert
* Network Visualization page shows excessive dropped packets on CVM/Host Which steps should be taken to determine which problem should be addressed first?

* Access the Hardware Page to verifyresources are available
* Analyze ail CVM Speed Alerts in the Alerts/Events page
* Analyze output for the network and interface properties and connectivity issues

* Verify Host/CVM connectivity on the Network Visualization page
* Use toverify the bridge and bond configuration
* Review alerts/events page for the CVM disconnected error

* Review Alerts page for NIC speed alerts and alert timing
* Analyze the genesis.out log file for process failures
* Assess the NIC properties inthe Network Visualization > Host Properties page

* Restart networking services on the CVM
* Determine the current configuration of the affected CVM via output
* Access the Alerts/Events page for the CVM network connection failures

Q105. A VDI environment based on AHV Cluster is not performing well. The current environment isusing only one bridge (Bridge0). The administrator needs to verify if nodes are using all network cards associated to Bridge0.
Which two menus should be used to check the current configuration? (Choose two.)

Network Configuration item in Settings menu

Host view in Network menu

Host NICs tab in Hardware menu

I/O Metrics tab in VM menu

Q106. Refer to the exhibit.

An administrator creates a security policy that isolates their financial application from accessing the Internet When viewing the policy in Prism Central, several connections from the application are outbound to the Internet.
What is causing this issue with the policy?

The 0.0.0.0 address was not specified in the outbound rule.

The blockedconnections are illustrated for information only.

The Activate box was not checked in the rule, so it is not enforcing.

The policy has been left in monitor mode instead of enforcing mode.

Q107. Refer to the exhibit.

An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?

Change the network the VMs are connected to

Change the spanning-tree port type on the switch

The VMs need to have static IPaddresses

Update the switch to specifically allow VLAN 15

Q108. An administrator has a custom backup application that requires a 2TB disk and runs in Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* Four vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?

Increase the number of cores per vCPU

Increase the vCPUs assigned to the VM

Span the 2TB disk across four vDisks

Add 4GB of memory to the VM

Q109. An administrator is configuring an All Flash cluster to support the following workloads:
* Full clone virtual desktops
* Hadoop
* Write heavy databases
Whichthree correct configuration options should the administrator use to meet the item requirements? (Choose three.) For each procedure, indicate whether it is a correct or incorrect procedure that must be configured to meet the item requirements using the drop-down option.

Q110. Refer to the exhibit.

An administrator logged into Prism Element, notices the following in the home dashboard, and showing the exhibit.
Which action should the administrator take next?