4/5 - (1 vote)

[2023] Pass VMware 3V0-42.20 Exam Updated 59 Questions

Get 2023 Updated Free VMware 3V0-42.20 Exam Questions and Answer

VMware 3V0-42.20 certification exam is designed to test the knowledge and expertise of professionals in advanced design concepts related to VMware NSX-T Data Center. Advanced Design VMware NSX-T Data Center certification exam is aimed at those who have experience in designing and implementing VMware NSX-T Data Center solutions and want to take their skills to the next level.

 

Q29. A customer has a requirement to implement a next generation firewall (NGFW) to improve security network introspection. The customer wants to apply the NGFW to all workloads exposed both internally and externally. The customer wants the NGFW to work seamlessly with NSX-T Data Center and vSphere.
Which solution should be recommended to the customer? (Choose the best answer.)

 
 
 
 

Q30. A telecom company has purchased NSX-T as part of a Software Defined Data Center (SDDC) initiative. The company wants to ensure the highest performance for network traffic leaving the virtual environment.

 
 
 
 
 

Q31. A Solutions Architect is designing an environment with 1,200 services being offered through the NSX-T Data Center Load Balancer. Which three selections are necessary to meet the minimum requirements to support the solution? (Choose three.)

 
 
 
 
 
 

Q32. A Solutions Architect is designing an environment with 1,200 services being offered through the NSX-T Data Center Load Balancer.
Which three selections are necessary to meet the minimum requirements to support the solution? (Choose three.)

 
 
 
 
 
 

Q33. Refer to the exhibit.

A financial company is adopting micro-services with the intent of simplifying network security. An NSX-T architect is proposing a NSX-T Data Center micro-segmentation logical design. The architect has created a diagram to share with the customer.
How many security levels will be implemented according to this Logical Design? (Choose the best answer.)

 
 
 
 

Q34. Which two resources can be used by an NSX architect during the Assessment Phase? (Choose two.)

 
 
 
 
 

Q35. A customer deploying NSX-T Data Center requires role based access controls be enforced in NSX Manager with these requirements:
* identity platform must be highly available
* authentication must be performed by customer’s existing SAML identity provider
* MFA must be performed by administrator to gain access to NSX Manager
Which identity deployments would meet the customer’s requirements? (Choose the best answer.)

 
 
 
 

Q36. Which three choices are non-functional requirements? (Choose three.)

 
 
 
 
 
 

Q37. A Solutions Architect is working with a customer which wants to extend their traditional Telco IP/MPLS core network to an NFV cloud.
Which NSX-T Data Center feature can be recommended by the architect? (Choose the best answer.)

 
 
 
 

Q38. An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Migrating existing data center to KVM hosts.
Redundancy and high availability are required.
No component can be a single point of failure.
Which selection should the architect recommend? (Choose the best answer.)

 
 
 
 

Q39. A telecom company has purchased NSX-T as part of a Software Defined Data Center (SDDC) initiative. The company wants to ensure the highest performance for network traffic leaving the virtual environment.
Which two selections would an architect recommend to achieve the customer’s goal? (Choose two.)

 
 
 
 
 

Q40. An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
Customer is concerned with NSX Manager availability.
3 cabinets/racks are available in the data center.
No integration with 3rd party solution is required.
There is no budget for physical equipment acquisition.
The 3 cabinets/racks do not share the same L2 domain.
Which three selections should the architect include in their design to address the customer’s concern with NSX Manager availability? (Choose three.)

 
 
 
 
 
 

Q41. An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
There is a performance based SLA for East – West traffic.
The business critical applications require prioritization of their traffic.
One of the services is a file share and has a high demand for bandwidth.
Which selection should the architect include in their design? (Choose the best answer.)

 
 
 
 

Q42. A Solution Architect will be deploying an Ethernet Virtual Private Network (EVPN) in their NSX-T Data Center environment.
What two selections must be prepared for the EVPN deployment? (Choose two.)

 
 
 
 
 

Q43. Which three IPv6 features are supported in an NSX-T Data Center design? (Choose three.)

 
 
 
 
 
 

Q44. An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop about ESXi Host networking:
* A total of 50 ESXi hosts to be configured as Transport Nodes.
* All ESXi hosts have a dedicated 2 × Intel 10Gbps Physical Network adapter for the Overlay Traffic.
To achieve low latency, high throughput, redundancy, and performance, which two NIC teaming policies should the architect recommend? (Choose two.)

 
 
 
 
 

Q45. Refer to the exhibits.
Design Option1:

Design Option 2:

Design Option 3:

Design Option 4:

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
The conceptual design includes these requirements, assumptions, constraints, and risks:
Critical applications must run across sites without changing IP address.
Business continuity and disaster recovery (BCDR) plans will leverage a second site running vSphere.
RTO/RPO must be reduced for recovery of applications on secondary site.
IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)

 
 
 
 

Q46. A customer deploying NSX-T Data Center requires role based access controls be enforced in NSX Manager with these requirements:
identity platform must be highly available
authentication must be performed by customer’s existing SAML identity provider MFA must be performed by administrator to gain access to NSX Manager Which identity deployments would meet the customer’s requirements? (Choose the best answer.)

 
 
 
 

Q47. What would an architect recommend to a customer that wants to extend management to an additional data center through Layer 2, but does not want to add additional NSX-T licensing? (Choose the best answer.)

 
 
 
 

Q48. An NSX-T Architect is working in a brownfield environment with 4 ESXi hosts. These constraints were documented:
new servers cannot be purchased
North/South bandwidth must be guaranteed
Top-of-Rack switches have additional uplinks
Which three recommendations should the architect implement? (Choose three.)

 
 
 
 
 

Q49. An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
Maximum performance and availability is required between the physical and virtual network.
Load Balancing service is required for back-end web servers.
NAT is required.
Which selection should the architect include in their design? (Choose the best answer.)

 
 
 
 

VMware 3V0-42.20 certification exam is a comprehensive exam that covers a wide range of topics related to NSX-T Data Center, including architecture, design, and implementation. It is a 60-question exam that must be completed within 120 minutes. 3V0-42.20 exam is available in English and Japanese.

 

Verified 3V0-42.20 exam dumps Q&As with Correct 59 Questions and Answers: https://www.actualcollection.com/3V0-42.20-exam-questions.html

Related Links: www.stes.tyc.edu.tw www.stes.tyc.edu.tw myportal.utt.edu.tt myportal.utt.edu.tt www.stes.tyc.edu.tw myportal.utt.edu.tt