[2024] Pass Oracle 1Z0-821 Test Practice Test Questions Exam Dumps [Q37-Q52]

Q37. Which two are implemented using the Internet Control Message Protocol (ICMP)?

ping

DHCP

HTTP

telnet

syslog

traceroute

Q38. To confirm the IP address and netmask have been correctly configured on the network interfaces which command should you use?

ipdilm show-if

ipadm show-nic

ipadm show-addr

ipadm show-ifconfig

ipadm show-addripadmshow-mask

Q39. alice is a user account used by Alice on a Solaris 11 system. sadmin is a role account on the same system.
Your task is to add the command /usr/sbin/cryptoadm to the Network management profile,so that Alice can execute it,while assuming the sadmin role.
Select the three activities necessary to accomplish this.

To the file /etc/security/prof_attr,add the line: Network Management: solaris:cmd:RO::/usr/sbin/cryptoadm:euid=0

To the file /etc/security/auth_attr,add the line:Network Management: solaris:cmd:RO::/usr/sbin/cryptoadm:euid=0

To the file /etc/security/exec_attr.d/local-entriies,add the line:Network Management: solaris:cmd:RO::/usr/sbin/cryptoadm:euid=0

Run the roles alice to ensure that alice may assume the role sadmin.

Run the command profiles sadmin to ensure that the role sadmin includes the network Management profile.

Run the command profiles alice to ensure that the Alice has permissions to access the Network management profile.

Run the command profiles “Network management” to ensure that the Network management profile includes the sadmin role.

Q40. You are creating a non-global zone on your system.
Which option assigns a zpool to a non-global zone, and gives the zone administrator permission to create zfs file system in that zpool?

While creating the non-global zone, make the following entry: add deviceset match=/dev/rdsk/ c4t0d0endBoot the zone and log in the zone as root. Create the zpool: zpool create pool2 c4t0d0In the non-global zone, root can now create ZFS file system in the pool2 zpool

In the global zone, create the zpool: global# zpool create pool2 c4t1d0While creating the no-global zone, make the following entry: add datasetset name=pool2endadd fsset dir=pool1set special=pool1set type=zfspool1endBoot the zone, log in the zone as root, and create the zfs file system in the pool2 zpool.

In the global zone, create the zpool:global#zpool create pool2 c4t1d0While creating the global zone, make the following entry: add datasetset name=pool2endBoot the zone, log in to the zone as root and create the zfs file systems in the pool2 zpool.

In the global zone, create the zpool and the ZFS file systems that you want to use in the non-global zone: global#zpool create pool2 c4t1d0global#zfs create pool2/dataWhile creating the non-global zone, make the following entry for each ZFS file system that you want to make available in the zone: add fsset dir=/dataset special=pool2/dataset type=zfsend

Create the zpool in the global zone: global#zpool create pool2 c4t1d0Boot the non-global zone, log in to the zone as root, and issue this command to delegate ZFS permissions to root: non-global zone# zfs allow root create , destroy, mount pool2Log in to the non-global zone create ZFS file systems in the pool2 zpool.

Q41. In order to display the IP addresses of network interfaces, what command would you use?

dladm

ipconfig

sves

ipadm

ipaddr

Q42. The following information is displayed about the compress/zjp software package, which Is currently installed on this system:
NAME (PUBLISHER)VERSIONIFO
Compress/zip3.1.2-0.175.0.0.0.0.537if-
NAMEVERSIONDATECOMMENT
Compress/zip3.109 Dec 2011 04:50:38 ESTNone
Which statement describes the information that is displayed tor the compress/zip software package?

This package cannot be removed.

This package can be updated to a new version when the new version of the package becomes available.

This package cannot be updated.

This package can be updated to version 3.1.3 but not 3.2.

This package cannot be downgraded to version 3.1.1.

Q43. Given:
file1 and file2 are text files.
dir1 and dir2 are directories.
Which two commands will be successful?

cp dir1 dir1

cp dir1 file1

cp file? dir1

cp file. dir1

cp file% dir2

cp file1 file2 dir1

Q44. The ZFS configuration on your server is:
Pool1 6.67G31K/pool
Pool1/data31K31K/data
Select the three commands that you would use to 1. Create, 2. List, and 3. Delete a snapshot of the /data file system.

zfs snapshot pool1/data@now

zfs create snapshot pool1/data@now

zfs list -t snapshot

zfs list -t snapshot pool1/data

zfs destroy pool1/data@now

zfs destroy snapshot pool1/data@now

Q45. You have edited /etc/profile to include the lines:
dennis_says=hello
export dennie_says
You have also edited /etc/skel/local.profile to include the line:
dennis_says=world You now create a new user account brian, and specify use of the bash shell. When brian logs in and enters
Echo $dennis_says
What will he see, and why?

world, because the local.profile entry will be executed last

hello, because the global /etc/profile entry overrides the local.profile entry

hello, because the local.profile entry is not automatically sourced on login

hello, because the value specified in local.profile was not exported

nothing, because the variable was not exported in local.profile

Q46. When you issue the “gzip: zommand not found” message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?

pkg info|grep gzip

pkg list SUNWgzip

pkg contents gzip

pkg search gzip

Q47. You create a flash archive of the Solaris 10 global zone on the serves named sysA. The archive name is s10- system.flar, and it is stored on a remote server named backup_server.
On sysA, you create a Solaris 10 branded zone named s10-zone.
You want to use the flash archive, located On” /net/bactup_servers/10-system.flar, to install the Operating system in the s10-zone zone.
Which command do you choose to install the s10-system.flar archive in the Solaris 10 branded zone (s10- zone)?

zoneadm -z s10 -zone install – a /net/backup_server/s10-system.flar -u

zonecfg -z s10 -zone install – a /net/backup_server/s10-system.flar -u

zoneadm – z s10 -zone clone – s /net/backup_server/s10-system.flar

zone cfg – a s10-zone create – t SUNWsolaris10</net/backup_server/s10-system.flar

zonecfg -z s10-zone install -f /net/backup/backup_server/s10-system.flar

Q48. View the exhibit.

The configuration information in the exhibit is displayed on your system immediately after installing the OS.
Choose the option that describes the selection made during the Installation of the OS to obtain this configuration.

The automatic network configuration option was chosen during the installation of the OS.

The manual network configuration option was chosen during the installation of the OS.

The network was not configured during the installation of the OS.

The DHCP network configuration option was chosen during the Installation of the OS.

Q49. ServerA contains two ISO images of a package repository named so1.repo.iso-a and so1.repo.iso-b respectively. You need to create a single local package repository on server that clients can connect to.
The package repository will be stored on the /export/IPS file system and named repo. The preferred publisher will be named solaris and the publisher URL will be http://serverA.example.com.
Which is the correct procedure to perform on ServerA to create the local Package repository?

cat so1.repo.iso-a sol.repo.iso-b > so1.full.isoMount the ISO image and use the rsync command to extract the contents of the ISO file to the /export/IPS file system.Set the pkg/inst_root property to / export/IPS/repo and the pkg/readonly property to true.Set the preferred publisher by using pkg set- publisher -Ghttp://pkg.oracle.com/solaris/release/ -g http”//serverA.example.com/ solaris

cat so1.repo.iso-a so1.repo.iso-b > /export/IPS/repoSet the pkg/inst_root property to true and the pkg/ readonly property to /export/IPSSet the preferred publisher by using pkg set-publisher -G http:// serverA.example.com/ -g http://pkg/oracle.com/solaris/rekease/solaris

cat so1.repo.iso-a so1.repo.iso-b > so1.full.isoMount the ISO image and use the rsync command to extract the contents of the ISO file to /export/IPS/repoSet the pkg/inst_root property to /export/IPS/repo and the pkg/readonly property to trueSet the preferred publisher by using pkg set-publisher solaris -g
http://pkg.oracle.com/

cat so1.repo, iso-a so1.repo.iso-b > /export/IPS/repo.isoMount the ISO image and copy the repo directory from the ISO image to /export/IPS/reposet the pkg/inst_root property and the pkg/readonly property to /export/IPS/reposet the preferred pkg/inst_root property by using pkg set-publisher – G
http://serverA.example.com/ – g http://pkg.oracle.com/solaris.com/release/- p solaris

Q50. You wish to edit your crontab file that is located in /var/spool/cron/crontab. What command must you enter to edit this file?

crontab -e

crontab -e /var/spool/cron/crontab

crontab -r

crontab -e /etc/default/cron

Q51. You start to execute a program by using the following command:
~/bigscript &
You then determine that the process is not behaving as expected, and decide that you need to terminate the process.
Based on the information shown below, what is the process number you should terminate?

15163

15156

15166

15165

Q52. View the following information for a software package:

Which command would you use to display this information for a software package that is not
currently installed on your system?

pkg list gzip

pkg info -r gzip

pkg search -1 gzip

pkg verify -v gzip

pkg contents gzip

Leave a comment Cancel reply