[2025] Pass your FCP_FMG_AD-7.4 exam with this 100% Free FCP_FMG_AD-7.4 Braindump [Q21-Q44]

Rate this post

[2025] Pass your FCP_FMG_AD-7.4 exam with this 100% Free FCP_FMG_AD-7.4 Braindump

View All FCP_FMG_AD-7.4 Actual Exam Questions, Answers and Explanations for Free

Fortinet FCP_FMG_AD-7.4 Exam Syllabus Topics:

Topic	Details
Topic 1	Administration: This section covers how to understand FortiManager capabilities, perform initial configurations, and set up administrative domains (ADOMs).
Topic 2	Device Manager: In this domain, the focus is on how to register devices within ADOMs, implement configuration changes using scripts, and troubleshoot using the revision history.
Topic 3	Advanced Configuration: This domain explains FortiManager’s high availability (HA), configures FortiGuard services and works with the global database ADOM.
Topic 4	Troubleshooting: This section covers how to fmiliarize with FortiManager deployment scenarios and troubleshoot issues related to imports, installations, device-level, ADOM-level, and system-level concerns.
Topic 5	Policy and Objects: This section deals with how to manage policies and objects, oversee ADOM revisions, configure workspace mode, and conduct policy imports and installations.

NEW QUESTION 21
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

FortiManager will not push the CLI commands as part of the installation that will cause the tunnel to go down.

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

NEW QUESTION 22
Refer to the exhibit which shows the Download Import Report.

Why is FortiManager failing to import firewall policy ID 1?

Policy ID 1 is configured from the interface any to port6. FortiManager rejects the request to import this policy because the any interface does not exist on FortiManager

Policy ID 1 for this managed FortiGate already exists on FortiManager in the policy package named Remote-FortlGate.

Policy ID 1 has an address object that already exists in the ADOM database with any as the interface association, and conflicts with the address object interface association locally on FortiGate.

Policy ID 1 does not have the ADOM Interface mapping configured on FortiManager.

NEW QUESTION 23
Refer to the exhibit.

What can you conclude from the failed installation log shown in the exhibit?

Policy ID 2 is installed in the disabled state.

Policy ID 2 is installed without the remote user student.

Policy ID 2 will not be installed.

Policy ID 2 is installed without a source address.

From the log provided in the exhibit, several conclusions can be drawn regarding the installation of Policy ID
2:
* The installation process fails when attempting to set theLDAP user “student”. The log shows:
* “Attribute ‘ldap-server’ MUST be set.”: This error indicates that when setting up the LDAP user configuration, a mandatory field (ldap-server) is missing. As a result, the configuration could not be completed for the user.
* “entry not found in datasource”and”value parse error before ‘student'”: These errors confirm that the user “student” could not be properly added due to a configuration issue (such as the missing LDAP server).
Because of these errors, while other configuration elements (such as source and destination interfaces, actions, and services) are properly set, the user configuration for”student”isnot applied.
Evaluation of the answer options:
* A. Policy ID 2 is installed in the disabled state.
* This isfalse. There is no indication in the log that Policy ID 2 is disabled.
* B. Policy ID 2 is installed without the remote user student.
* This istrue. Due to the failure in setting the”student”user (as indicated by the errors), the policy will be installedwithoutthat user being properly configured.
* C. Policy ID 2 will not be installed.
* This isfalse. The policy is installed, but the user configuration failed. The rest of the policy configuration appears to have proceeded without critical errors that would prevent the installation.
* D. Policy ID 2 is installed without a source address.
* This isfalse. The log shows that the source address is properly set to “all” (set srcaddr all), so this is not the cause of the issue.
From the log exhibit, we see errors related to the “ldap-server” attribute not being set and an error with the entry “student” not being found in the datasource. This indicates that Policy ID 2 will not be installed due to missing or incorrect data required for successful installation. The “Command fail. Return code -3” confirms the installation failure, so the correct answer is C.
Options A, B, and D are incorrect because:
* A suggests the policy is installed in a disabled state, which isn’t supported by the log.
* B and D suggest partial installation, but the error messages indicate a complete failure to install Policy ID 2.
FortiManager References:
* Refer to FortiManager 7.4 Troubleshooting Guide: Common Errors and Log Interpretation.

NEW QUESTION 24
An administrator created a new ADOM named Training for FortiGate devices only, and added the root FortiGate device of a Security Fabric group to the Training ADOM.
Given the administrator’s actions, which statement correctly describes the expected result for the downstream devices in the Security Fabric?

The downstream devices show as unauthorized in the Training ADOM

The downstream devices are automatically authorized.

The downstream devices will appear in the root ADOM.

The downstream devices must be added using the Add Device wizard.

NEW QUESTION 25
What happens if you create an ADOM with version 7.2, add FortiGate devices running FortiOS 7.2, and then upgrade the FortiGate devices to FortiOS 7.4?

The ADOM can concurrently manage FortiGate devices running different firmware versions.

Adding higher version FortiGate devices to a lower version ADOM triggers an automatic ADOM upgrade.

The ADOM restricts access to devices running lower firmware versions.

Upgrading the FortiGate devices to FortiOS 7.4 may result in ADOM database corruption.

NEW QUESTION 26
Which configuration setting for FortiGate is part o an ADOM-level database on FortiManager?

NSX-T Service Template

Routing

SNMP

Security profiles

NEW QUESTION 27
An administrator has enabled Service Access on FortiManager. What is the purpose of Service Access on the FortiManager interface?

It allows administrative access to FortiManager.

It allows FortiManager to respond to requests for FortiGuard services from FortiGate devices.

It allows third-party applications to gain read/write access to FortiManager.

It allows FortiManager to determine the connection status of managed devices.

NEW QUESTION 28
What will be the result of reverting to a previous revision version in the revision history?

It win install configuration changes to managed device automatically.

It will tag the device settings status as Auto-Update.

It will modify the device-level database.

It will generate a new version ID and remove all other revision history versions.

NEW QUESTION 29
Refer to the exhibit.

You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)

It installs provisioning template changes on the FortiGate device.

It provides the option to preview only the policy package changes before installing them.

It installs all the changes in the device database first and the administrator must reinstall the changes on the FortiGate device.

It installs device-level changes on the FortiGate device without launching the Install Wizard

NEW QUESTION 30
Refer to the exhibit. An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM.
After the installation operation is performed, which IP/netmask will be installed on Local-FortiGate for the LOCAL_SUBNET firewall address object?

192.168.1.0/24

Local-FortiGate automatically chooses an IP/netmask based on its network interface settings.

It will create two firewall address objects on Local-FortiGate with 192.168.1.0/24 and 10.0.5.0/24 values.

10.0.5.0/24

NEW QUESTION 31
Which statement about the upgrade of ADOMs on FortiManager is true?

You cannot import policies from a device until its FortiOS version matches the ADOM version.

Upgrading the FortiManager version upgrades all existing ADOMs automatically.

To ensure database consistency, you must upgrade an ADOM before you upgrade the devices in it.

ADOMs using global objects can be upgraded before or after upgrading the global database ADOM.

NEW QUESTION 32
Which statement about the upgrade of ADOMs on FortiManager is true?

To ensure database consistency, you must upgrade an ADOM before you upgrade the devices in it.

Upgrading the FortiManager version upgrades all existing ADOMs automatically.

You cannot import policies from a device until its FortiOS version matches the ADOM version.

ADOMs using global objects can be upgraded before or after upgrading the global database ADOM.

NEW QUESTION 33
An administrator is in the process of copying a system template profile between ADOMs by runningthe following command: executefmprofile import-profile ADOM2 3547 /tmp/myfile Where does this command import the system template profile from?

FortiManager file system

ADOM2 object database

ADOM2 device database

Source ADOM policy database

NEW QUESTION 34
Refer to the exhibit. Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two.)

Unlocking an ADOM will submit configuration changes automatically to the approval administrator.

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out.

Unlocking an ADOM will install configuration changes automatically on managed devices.

The same administrator can lock more than one ADOM at the same time.

NEW QUESTION 35
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)

The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices.

The Security Fabric settings are part of the device-level settings.

The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices.

The Security Fabric license, group name, and password are required for the FortiManager Security Fabric integration.

NEW QUESTION 36
Exhibit.

Given the configuration shown in the exhibit, what are two results from this configuration? {Choose two.)

You can validate administrator login attempts through external servers.

The same administrator can lock more than one ADOM at the same time.

Two or more administrators can make configuration changes at the same time, in the same ADOM.

Concurrent read-write access to an ADOM is disabled.

NEW QUESTION 37
Refer to the exhibit. An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM.
After the installation operation is performed, which IP/netmask is shown on FortiManager for this firewall address object for devices without a Per-Device Mapping set?

FortiManager generates an error for each FortiGate without a per-device mapping defined for that object.

192.168.1.0/24

192.168.1.0/28

FortiManager replaces the address object to none.

NEW QUESTION 38
Refer to the exhibit.

You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)

It installs provisioning template changes on the FortiGate device.

It provides the option to preview only the policy package changes before installing them.

It installs all the changes in the device database first and the administrator must reinstall the changes on the FortiGate device.

It installs device-level changes on the FortiGate device without launching the Install Wizard

NEW QUESTION 39
What is a characteristic of the FortiManager high availability (HA) feature?

When a secondary unit is removed, FortiManager updates the managed devices using TCP port 5199.

The primary unit synchronizes all configuration revision with the seconday units.

All secondary units must be in the same network as the primary unit.

Each cluster member must be upgraded manually, starting with the primary unit.

NEW QUESTION 40
Exhibit.

Given the configuration shown in the exhibit, which two statements are true? (Choose two.)

An administrator can also lock the Local-FortiGate_root policy package.

FortiManager is in workflow mode.

The FortiManager ADOM is locked by the administrator.

The FortiManager ADOM workspace mode is set to Normal

NEW QUESTION 41
Refer to the exhibit. How will FortiManager try to get updates tor antivirus and IPS?

From the list of configured override servers or public FDN servers

From the configured override server IP address 10.0.1.50 only

From the default server fds1.fortinet.com

From public FDNI server IP address with the fourth highest octet only

NEW QUESTION 42
Refer to the exhibit.

An administrator is about to add the FortiGate device to FortiManager using the discovery process.
FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result?

During discovery. FortiManager uses only the FortiGate serial number to establish the connection.

During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.

During discovery. FortiManager sets the NATed device IP address on FortiGate.

During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.

NEW QUESTION 43
What is the purpose of ADOM revisions?

To save the current state of all policy packages and objects for an ADOM

To save the FortiManager configuration in the System Checkpoints

To save the current state of the whole ADOM

To revert individual policy packages and device-level settings for a managed FortiGate

NEW QUESTION 44
An administrator enabled workspace mode and now wants to delete an address object that is currently referenced in a firewall policy. Which two results can the administrator expect? (Choose two.)

FortiManager will temporarily change the status of the referenced firewall policy to disabled.

FortiManager will disable the status of the address object until the changes are installed.

FortiManager will not allow the administrator to delete a referenced address object until theylockthe ADOM.

FortiManager will replace the deleted address object with the none address object in the referenced firewall policy.

FCP_FMG_AD-7.4 dumps Free Test Engine Verified By It Certified Experts: https://www.actualcollection.com/FCP_FMG_AD-7.4-exam-questions.html

Fortinet FCP_FMG_AD-7.4 Exam Syllabus Topics:

Leave a comment Cancel reply