MTCNA Dumps with Practice Exam Questions Answers [Q76-Q99]

5/5 - (1 vote)

MTCNA Dumps with Practice Exam Questions Answers

MTCNA by MTCNA – MikroTik Training Actual Free Exam Practice Test

MikroTik MTCNA certification program is an ideal starting point for individuals looking to build a career in the networking field. MikroTik Certified Network Associate Exam certification program offers a comprehensive overview of the networking concepts and provides hands-on training on the MikroTik routers, helping individuals gain practical experience in configuring and managing networks. MikroTik Certified Network Associate Exam certification program is highly valued in the networking industry and is recognized globally, making it an excellent way to showcase an individual’s proficiency in networking and routing using MikroTik routers.

Q76. Mark the queue types that are available in RouterOS

SFQ – Stochastic Fairness Queuing

DRR – Deficit Round Robin

FIFO – First In First Out (for Bytes or for Packets)

LIFO – Last In First Out

PCQ – Per Connection Queuing

RED – Random Early Detect (or Drop)

Q77. What protocols are used to configure trunking on a switch?
VLAN Trunking Protocol
VLAN
802.1Q
ISL

1 and 2

3 and 4

1 only

2 only

Q78. Which of the following protocols / port s are used for SNMP. (Simple Network Management Protocol)

TCP 162

UDP 162

UDP 161

TCP 25

TCP 123

TCP 161

Q79. What configuration is added by /ip Hot-Spot setup command? (Select all that apply)

/ip service

/ip Hot-Spot user

/ip Hot-Spot walled-garden

/ip dhcp-server

/queue tree

Q80. Which of the following keystrokes enables safe mode in console:

Ctrl+x

Ctrl+c

Ctrl+d

Ctrl+s

Q81. What is marked by connection-state=established matcher?

Packet belongs to an existing connection,for example a reply packet or a packet which belongs to already replied connection

Packet is related to, but not part of an existing connection

Packet does not correspond to any known connection

Packet begins a new TCP connection

Q82. What does this simple queue do (check the image)?

Queue guarantees upload data rate of one megabit per second for host 192.168.1.10

Queue limits host 192.168.1.10 download data rate to one megabit per second.

Queue limits host 192.168.1.10 upload data rate to one megabit per second.

Queue guarantees download data rate of one megabit per second for host 192.168.1.10

Q83. Consider the following network diagram. In R1, you have the following configuration:
/ip route
add dst-address=192.168.1.0/24 gateway=192.168.99.2
/ip firewall nat
add chain=srcnat out-interface=Ether1 action=masquerade
On R2, if you wish to prevent all access to a server located at 192.168.1.10 from LAN1 devices, which of the following rules would be needed?

/ip firewall filter add chain=forward srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop

/ip firewall filter add chain=forward srcaddress=192.168.0.0/24 dst-address=192.168.1.10 action=drop

/ip firewall filter add chain=input srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop

/ip firewall nat add chain=dstnat srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop

Q84. Bridging loops can be avoided by enabling:

RSTP protocol

STP protocol

Connection tracking

UDP filter

ICMP filter

Q85. Select all tunnels that support authentication of clients with a username and password.

PPPoE

OpenVPN

IPIP

PPTP/L2TP

EoIP

Q86. You have 10 users plugged into a hub running 10Mbps half-duplex. There is a server connected to the switch running 10Mbps half-duplex as well. How much bandwidth does each host have to the server?

100 kbps

1 Mbps

2 Mbps

10 Mbps

Q87. Select valid MACaddress

G2:60:CF:21:99:H0

00:00:5E:80:EE:B0

AEC8:21F1:AA44:54FF:1111:DDAE:0212:1201

192.168.0.0/16

Q88. Which command is used to upgrade an IOS on a Cisco router?

copy tftp run

copy tftp start

config net

copy tftp flash

Q89. [VLAN Management – VTP and Cisco Switching] Which one of the following is true regarding VLANs?

Two VLANs are configured by default on all Cisco switches.

VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed.

You should not have more than 10 switches in the same VTP domain.

VTP is used to send VLAN information to switches in a configured VTP domain.

Q90. Which router command allows you to view the entire contents of all access lists?

show all access-lists

show access-lists

show ip interface

show interface

Q91. A network-ready device is directly connected to a MikroTik RouterBOARD 750 with a correct U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.100.70 using a subnet mask of
255.255.255.252. What will be a valid IPv4 address for the RouterBOARD 750 for a successful connection to the device?

192.168.100.69/255.255.255.252

192.168.100.70/255.255.255.252

192.168.100.71/255.255.255.252

192.168.100.68/255.255.255.252

Q92. Which class of IP address provides a maximum of only 254 host addresses per network ID?

Class A

Class B

Class C

Class D

Q93. The correct order for PPPoE discovery stage is:

Initialization, Session confirmation, Request and Offer

Initialization, Offer, Request and Session confirmation

Request, Initialization, Session confirmation and Offer

Request, Offer, Initialization and Session confirmation

Q94. The highest queue priority is:

256

Q95. How many different priorities can be selected for queues in MikroTik RouterOS?

Q96. There are two wireless cards (wlan1 and wlan2) which are bridged together. On wlan1 card there is a setting
“Forwarding=no”. Choose the correct answer(s):

Stations on wlan2 will be able to communicate with stations on wlan2

Stations on wlan2 will be able to communicate with stations on wlan1

Stations on wlan1 will be able to communicate with stations on wlan1

To prevent communication between wlan1 and wlan2 one cannot use Bridge Filters

Stations on wlan1 will be able to communicate with stations on wlan2

Q97. In which situations can Netinstall NOT be used to install a RouterBOARD?

The router does not have an operating system

The router is connected only to a wireless network

You do not know the password of the router

The router is connected only to a secondary Ethernet port

Q98. Which is the default port of IP-Winbox?

UDP 8291

TCP 80

TCP 8291

TCP 8192

Q99. The highest queue priority is

256

MikroTik MTCNA (MikroTik Certified Network Associate) Certification Exam is a globally recognized certification program that focuses on the fundamentals of networking and routing. MikroTik Certified Network Associate Exam certification is designed for individuals who are looking to gain proficiency in building and managing networks using MikroTik routers. The MTCNA certification provides an in-depth understanding of the MikroTik RouterOS software and its various features, including routing, firewall, wireless access points, and hotspot.

Free MTCNA – MikroTik Training MTCNA Exam Question: https://www.actualcollection.com/MTCNA-exam-questions.html

Leave a comment Cancel reply