[UPDATED 2025] USGBC LEED-Green-Associate Questions Prepare with Free Demo of PDF [Q139-Q161]

Explanation
Methane is a potent greenhouse gas that contributes to global warming and climate change. It is produced when organic waste decomposes anaerobically (without oxygen) in landfills1. Construction and demolition waste, which accounts for about a third of all solid waste generated in the world2, often contains a large amount of organic materials, such as wood, paper, and food waste1. Therefore, disposal of solid waste from building construction and operations in landfills has a substantial effect on methane emissions13. Incineration of solid waste also produces greenhouse gases, such as carbon dioxide, carbon monoxide, and hydrochloric acid, but at lower levels than landfilling45. Volatile organic compounds (VOCs) are not greenhouse gases, but they can react with other pollutants to form ozone, which is a greenhouse gas and a health hazard4.

According to the U.S. Energy Information Administration, space heating accounted for about 32% of energy use for all U.S. commercial buildings in 2018, followed by ventilation and lighting, each at about 10%1. Space heating is the largest single energy end use in U.S. office buildings as well2.
Reference:
Use of energy in commercial buildings – U.S. Energy Information Administration (EIA)1 DataTrends: Energy Use in Office Buildings | ENERGY STAR2

Explanation
Strategically locating functional and decorative hardscape on a project site can reduce the amount of on-site impervious area. Impervious surfaces are surfaces that do not allow water to infiltrate into the ground (e.g., concrete or asphalt). By reducing these surfaces, we can increase water infiltration, which helps recharge groundwater supplies and reduces stormwater runoff that can lead to erosion and water pollution. References:
LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The increase in air temperature in a developed area resulting from the dark surfaces of roadways, parking lots, and tarred rooftops is known as heat island effect. Heat island effect is a phenomenon whereby urban areas experience higher temperatures than rural areas due to the absorption and re-emission of solar heat by man-made surfaces. Heat island effect can have negative impacts on human health, energy consumption, air quality, and climate change. Some strategies to reduce heat island effect include increasing vegetation cover, using reflective or green roofs, using cool or permeable pavements, and enhancing natural ventilation.
Reference: LEED v4 BD+C Reference Guide, Sustainable Sites, page 35 ; EPA Heat Island Effect website 1

A charrette is an intensive, multi-disciplinary workshop with the aim of developing a design or vision for a project or planning activity. Charrettes are often conducted to design such things as parks and buildings, or to plan communities or transportation systems. A charrette should take place at the beginning of the project, when the design team can engage with all the stakeholders, including the client, users, consultants, contractors, regulators, and community members. A charrette at this stage can help to:
* Establish clear goals and objectives for the project
* Identify opportunities and constraints for the site and program
* Generate creative and innovative ideas and solutions
* Foster collaboration and consensus among diverse perspectives
* Reduce conflicts and delays during later phases of the project
* Enhance communication and trust among the project team
The other options are not appropriate phases for a charrette. Post commissioning is too late to influence the design or planning of the project. During the design process, some decisions may have already been made or some stakeholders may have been excluded. During the construction process, changes may be costly or impractical to implement. References: : Charrette

A scorecard rule for LEED Credit Point Allocation is that there is a maximum of 100 base points available for each rating system. These points are distributed among the different credit categories based on their relative contribution to the overall environmental impact and human health benefits of a project. The point allocation process is informed by a weighting methodology that uses life cycle assessment and expert judgment to assign weights to each of the LEED impact categories. The impact categories reflect the goals and priorities of LEED, such as reversing climate change, enhancing human health, protecting water resources, and promoting social equity. Reference: LEED v4 Impact Category and Point Allocation Process Overview1; LEED scorecard5

The use of native plant species, captured rainwater, and evapotranspiration controllers are all strategies that can contribute to reducing outdoor water use. Native plants are adapted to local conditions and typically require less water than non-native species. Captured rainwater can be used for irrigation, reducing the need for potable water. Evapotranspiration controllers adjust irrigation schedules based on weather conditions and plant needs, preventing overwatering. Reference: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Harvesting rainwater reduces reliance on potable water for non-potable uses like irrigation and flushing. LEED supports this approach under Water Efficiency credits for reducing potable water consumption.

Explanation
Installing concrete sidewalks and parking areas will increase the quantity of the rainwater that is discharged from a site. Rainwater is the water that falls as precipitation on a site. Rainwater discharge is the amount of rainwater that leaves a site as surface runoff or subsurface flow. Rainwater discharge can affect the quantity and quality of water resources downstream by causing erosion, flooding, sedimentation, pollution, and habitat loss. Concrete sidewalks and parking areas are examples of impervious surfaces that prevent rainwater from infiltrating into the soil and increase rainwater discharge by creating more runoff1 . References: LEED v4 Green Associate Candidate Handbook1, EPA’s Stormwater Management

LEED BD+C: Multifamily Midrise is the appropriate rating system for residential buildings that are four to eight stories above grade1. Since the project scope includes 60% of the gross floor area, it meets the minimum program requirement of having at least 40%of the gross floor area certified2. The other rating systems are not suitable for this project because they either apply to different building types or heights23.
LEED rating system selection guidance | U.S. Green Building Council2
LEED v4: Building Design + Construction Guide – U.S. Green Building Council3 LEED v4 Rating Systems | USGBC-LI1

EPA’s ENERGY STAR Portfolio Manager is a no-cost, interactive energy management tool that allows you to securely track and assess energy and water consumption across your building portfolio12. You can use Portfolio Manager to benchmark your building’s performance, set investment priorities, verify savings, and apply for ENERGY STAR certification23. Portfolio Manager does not measure embodied energy, which is the total amount of energy required to produce, transport, and install building materials.

A design charrette is the initial step in the LEED certification process. It brings together project stakeholders to identify sustainability goals, assess feasibility, and outline a strategy for achieving certification.

Pervious paving, also known as permeable paving, allows water to pass through it, facilitating the recharging of aquifers. This type of paving reduces runoff by allowing water to soak into the ground, which can help replenish groundwater supplies and reduce the impact on nearby water bodies. Reference: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

LEED certification is a process that evaluates the environmental performance and sustainability of a building project based on a set of rating systems. To earn LEED certification, a project must satisfy all the mandatory requirements, or prerequisites, of the chosen rating system, and earn a minimum number of points by meeting optional criteria, or credits. The number of points determines the level of certification: Certified (40-49 points), Silver (50-59 points), Gold (60-79 points), or Platinum (80+ points)123.
Employing a LEED AP (Accredited Professional) on the project team is not a requirement for LEED certification, but it can provide an advantage, as LEED APs have demonstrated their knowledge and expertise in green building and LEED rating systems. Having a LEED AP on the project team can also earn one point under the Integrative Process credit4.
Conducting a whole-building life-cycle assessment is not a requirement for LEED certification, but it can be an option for earning points under the Building Life-Cycle Impact Reduction credit. A life-cycle assessment is a method of evaluating the environmental impacts of a building over its entire life span, from extraction of materials to disposal or reuse3.
Earning a minimum of 50 points or meeting a prerequisite is not a sufficient condition for LEED certification, as it does not account for the other prerequisites or the level of certification. A project must meet all the prerequisites and earn at least 40 points to qualify for the lowest level of certification

The U.S. Green Building Council (USGBC) administers the LEED rating systems development. The LEED rating systems are frameworks that provide guidance and criteria for designing, constructing, operating, and maintaining green buildings. The USGBC is responsible for developing, maintaining, and updating the LEED rating systems through a consensus-based process that involves various stakeholders, such as technical experts, industry leaders, government representatives, and public comments. The LEED Green Associate Candidate Handbook states that “USGBC is committed to transforming the way our buildings are designed, constructed and operated through LEED” [1, p. 7]. Reference: LEED Green Associate Candidate Handbook, [LEED Rating Systems | U.S. Green Building Council]

Explanation
Potable water is water that is suitable for drinking. Potable water meets or exceeds the Environmental Protection Agency’s (EPA) drinking water quality standards and is free of contaminants that are harmful to human health. The other options are not suitable for drinking. Graywater is wastewater from sinks, showers, and laundry that can be reused for non-potable purposes such as toilet flushing and irrigation. Greenwater is rainwater that is collected and stored for non-potable uses. Stormwater is runoff from precipitation that can carry pollutants and sediments into waterways. References: LEED Green Associate Candidate Handbook, page 26; USGBC, [Water Efficiency], page 2.

The LEED for Neighborhood Development rating system has four certification levels: Certified, Silver, Gold, and Platinum. Each level requires a minimum number of points to achieve, based on the total number of available points in the rating system. The total number of available points is 110, and the minimum points for Platinum certification is 801. Therefore, the maximum points a new construction platinum LEED for Neighborhood Development certification level can earn are 110 – 80 = 30 points. However, there are also four regional priority credits that can be earned for addressing geographically specific environmental issues2. These credits are worth one point each, and can be added to the total score of a project. Therefore, the maximum possible points a new construction platinum LEED for Neighborhood Development certification level can earn are 30 + 4 = 34 points. However, the question asks for the maximum points that can be earned by a new construction project. According to the LEED Reference Guide for ND, new construction projects must meet all prerequisites and achieve at least 50% of the points available under the Green Infrastructure and Buildings category3. This category has 21 criteria, each worth one point, except for Certified Green Buildings, which is worth up to five points4. Therefore, the maximum points available under this category are 21 + 4 = 25 points. Since new construction projects must achieve at least 50% of these points, they must earn at least 13 points under this category. This means that they have less points to earn under the other categories (Smart Location and Linkage, and Neighborhood Pattern and Design), which have a total of 32 criteria worth one point each4. Therefore, the maximum points a new construction project can earn under these categories are 110 – 25 – 13 = 72 points. Adding the regional priority credits, the maximum possible points a new construction project can earn are 72 + 4 = 76 points. To achieve Platinum certification, a new construction project must earn at least 80 points1. Therefore, the maximum points a new construction platinum LEED for Neighborhood Development certification level can earn are 80 – 76 = 4 points under each of the four categories: Smart Location and Linkage, Neighborhood Pattern and Design, Green Infrastructure and Buildings, and Regional Priority Credits. Hence, the answer is D. 16.
Reference:
LEED certification for neighborhood development
LEED Reference Guide for ND
LEED for Neighborhood Development – Wikipedia
LEED rating system
LEED for Neighborhood Development – Infrastructure Tool Navigator

The coordination of building and site systems should be addressed at the predesign stage to maximize the impact of integrative process. The integrative process is a method of design and construction that involves the collaboration and coordination of all project stakeholders from the beginning to achieve the project’s sustainability goals1. The predesign stage is the earliest phase of the project, where the project vision, scope, budget, schedule, and performance targets are defined2. By addressing the coordination of building and site systems at this stage, the project team can identify and analyze the interrelationships and synergies among various systems, such as energy, water, materials, indoor environmental quality, and site ecology3. This can help the team to optimize the design solutions, reduce costs and risks, enhance performance and quality, and avoid rework and conflicts later in the projec