[Q75-Q97] Best Quality H35-210_V2.5 Exam Questions Huawei Test To Gain Brilliante Result!

Rate this post

Best Quality H35-210_V2.5 Exam Questions Huawei Test To Gain Brilliante Result!

Preparations of H35-210_V2.5 Exam 2026 Huawei Certified ICT Associate Unlimited 450 Questions

Huawei H35-210_V2.5 certification exam is an excellent way for professionals to demonstrate their skills and knowledge in access network technologies. HCIA-Access V2.5 certification is recognized globally and is highly respected by employers in the industry. Obtaining this certification can open up a wide range of career opportunities for professionals, including roles in network engineering, network planning, and network administration.

NEW QUESTION 75
Is the following description correct? Can test engineers use SmartKit NSE2700 Inspector on site to improve the efficiency of ADSL port activation?

True

False

NEW QUESTION 76
MA5600T/MA5680T all-in-one package loading method. By tying multiple files into one package file and loading them on the OLT equipment, the upgrade complexity of the OLT equipment can be greatly reduced. Which of the following options cannot be passed through the all-in-one package tool Unified loading?

Target version Main package

Patch file after upgrade

Special patch for source version upgrade

Source version SPH/SPC patch

NEW QUESTION 77
Is the following description correct? In the GPON network, in order to avoid data conflicts and improve network utilization efficiency, the downstream direction adopts TDMA multiple access mode and arbitrates the data transmission of each ONU.

True

False

NEW QUESTION 78
Is the following description correct? Computer network cardMACaddress isIETFUniformly assigned to each manufacturer, the only one in the world.

True

False

NEW QUESTION 79
Is the following description correct? ONT loading on MA5600T/MA5680T GPBC/GPBD is parallel on-board, and it supports parallel loading of 64 ONTs at the same time.

True

False

NEW QUESTION 80
In a 2.4 GHz frequency band, three sub-channels that do not interfere with each other can be used simultaneously.

TRUE

FALSE

* 2.4 GHz Frequency Band :
* The 2.4 GHz band is divided into 14 overlapping channels, each 20 MHz wide.
* However, only three channels (e.g., Channels 1, 6, and 11 in North America) are non-overlapping and can be used simultaneously without interference.
* Why TRUE?
* By using non-overlapping channels (e.g., 1, 6, and 11), wireless networks can operate concurrently without significant interference.
Thus, the correct answer is A .
References:
* HCIA Huawei ACCESS Official Documentation , Chapter: WLAN Frequency Bands.
* IEEE 802.11 Standards for WLAN .

NEW QUESTION 81
The Ethernet switch works in OSI
Which layer of the reference model?

Physical layer

data link layer

Network layer

Transport layer

NEW QUESTION 82
Is the following description correct? Administrators can maintain and manage UA5000 devices through out-of-band network management or in-band network management.

True

False

NEW QUESTION 83
Factors causing the ODN link loss include: (Select All that Apply)

Fiber transmission loss

Optical splitter loss

Extra line loss, about 3 dB in general

Splicing and cord end loss

Connectors and flange loss

ODN loss factors:
* A: Intrinsic fiber attenuation (~0.2 dB/km).
* B: Splitter insertion loss (e.g., 1:32 splitter #17 dB).
* D/E: Connector/splice losses (0.1-0.5 dB per point).

NEW QUESTION 84
When you need to maintain and manage the MA5600T/MA5603T equipment locally, you can log in to the system through the local serial port. Which interface is the RS-232 serial cable RJ-45 network port connector connected to?

The network port of the maintenance PC

“CON” port on the main control board

“ETH” port on the main control board

“ESC” port on the main control board

NEW QUESTION 85
Which of the following are common Ethernet switch VLAN link types? (Multiple choice)

Mix

Hybrid

Access

Trunk

NEW QUESTION 86
When adding an ONT to the OLT, you need to:

Configure a DBA profile.

Configure an ONT service profile.

Add an ONT and bind a profile.

Configure an ONT line profile.

Adding an ONT to the OLT:
Adding an ONT (Optical Network Terminal) to the OLT involves several steps, but the critical step is registering the ONT and binding it to the appropriate profile.
Key Steps:
DBA Profile: Configures dynamic bandwidth allocation for the ONT but is not mandatory during initial registration.
ONT Service Profile: Defines services (e.g., Internet, IPTV) but is applied after the ONT is added.
Add ONT and Bind Profile: Registers the ONT with the OLT and binds it to a pre-configured line profile. This is the essential step for adding an ONT.
ONT Line Profile: Configures the VLAN and service parameters but is created before adding the ONT.
Why C?
The most critical action when adding an ONT is to register it and bind it to a profile, ensuring it is recognized and operational within the network.
Thus, the correct answer is C.

NEW QUESTION 87
The MA5600 main control board (SCU) restarts repeatedly.
What are the reasons why it is impossible?

Main control board host software problem

Incorrect data configuration

User ring network problem

The main control board component is damaged

NEW QUESTION 88
The monitoring of environmental quantities refers to the monitoring of some environmental factors that may cause equipment damage, malfunctions, etc.
Which of the following is not the subject of environmental monitoring?

Temperature

Humidity

Flooding

Board status

NEW QUESTION 89
Is the following description correct? Version rollback generally includes three steps: 1. Load the original version of the package file; 2. Load the original version database backed up before the upgrade; 3. Reset the system.

True

False

NEW QUESTION 90
Is the following description correct? When the ONT is offline, the MA5600T/MA5680T can perform ONT PPPoE simulation test operations.

True

False

NEW QUESTION 91
Which of the following statements about ONT tcont is incorrect?

One ONU/ONT can contain multiple T-CONTs

tcont 1 generally carries OMCI channels

Uplink bandwidth is divided based on T-CONT, and different services use different T-CONTs

The GEM port is used as a service channel. A GEM port can carry one or more services in the flow

NEW QUESTION 92
Is the following description correct? The MA5600T SCUN board provides 1 maintenance network port, 1 serial port, 1 environmental monitoring port, and 8 GE ports.

True

False

NEW QUESTION 93
During normal operation and maintenance, you can run the display ont info command to query the “Run state” of the ONT. Which of the following states shows that the ONT is online?

active

online

to match

offline

NEW QUESTION 94
When the module status of the managed device side is abnormal, send a Trap message to the NMS through the Agent to inform the device side of the situation.

TRUE

FALSE

NEW QUESTION 95
Among common ODN products, large square heads, round heads, and small square heads refer to:

SC, FC, LC

FC, LC, SC

LC, SC, FC

None of the above

SC (Large Square Head): Square connector with a push-pull design. FC (Round Head): Round connector with a screw-on mechanism.

NEW QUESTION 96
What are the bandwidth types of DBA in GPON network?

Fix

Max

Assure

Non-assure

NEW QUESTION 97
Which of the following statements about VLANs during data service configuration are correct? (Select All that Apply)

In FTTx planning, broadband users connected to the same PON port use the same outer VLAN.

When a single tag is used, the service VLAN ID must be the same as the user VLAN ID.

User data can be mapped into different GEM ports according to different VLANs.

Generally, QinQ is used for data services, and inner tags are used to accurately identify different users.

* B: Single-tagging requires matching service/user VLAN IDs.
* C: VLAN-to-GEM mapping enables service segregation.
* D: QinQ uses outer VLAN for aggregation and inner VLAN for user identification.

Loading …

Huawei H35-210_V2.5 (HCIA-Access V2.5) Certification Exam is a professional-level certification exam offered by Huawei to IT professionals who want to specialize in network access technologies. HCIA-Access V2.5 certification exam is designed to validate an individual’s knowledge and skills in configuring and managing access networks using Huawei products and technologies. H35-210_V2.5 exam covers a range of topics, including network security, WLAN planning and design, network troubleshooting, and network management.

Focus on H35-210_V2.5 All-in-One Exam Guide For Quick Preparation: https://www.actualcollection.com/H35-210_V2.5-exam-questions.html

Leave a comment Cancel reply