Verified JN0-663 dumps Q&As – 100% Pass from ActualCollection [Q41-Q55]

4/5 - (1 vote)

Verified JN0-663 dumps Q&As – 100% Pass from ActualCollection

Pass JN0-663 Exam in First Attempt Guaranteed 2023 Dumps!

The JN0-663 exam is designed to test your knowledge and understanding of service provider networking technologies. To pass the exam, you must have a deep understanding of routing and switching protocols, MPLS, VPNs, and other advanced networking concepts. JN0-663 exam consists of multiple-choice questions and requires you to demonstrate your knowledge of these topics in a real-world scenario.

QUESTION 41
Exhibit:

Referring to the exhibit, which three statements are correct? (Choose three.)

This route contains the MAC address of an end host.

The router with the IP address 10.101.100.3 is the originator of this route.

This route is an EVPN Type-1 route.

This ESI Auto-Discovery route is used for designated forwarder election.

The ESI is 00:22:22:22:22:22:22:22:22:22.

QUESTION 42
Exhibit.

Your router should be configured with a rewrite rule which alters the default behavior of expedited forwarding as shown in the exhibit In this scenario which configuration is correct?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

QUESTION 43

You are the administrator of AS 65512. You are learning the 192.168.1.0/24 prefix from both AS 100 and AS 200. You want traffic destined to the 192.168.1.0.0/24 prefix to exit your AS towards AS 200.
How would you accomplish this task?

Configure an import routing policy on PE-2 to set a higher MED on the path learned from AS 100.

Configure an import routing policy on PE-2 to modify the origin attribute on the path learned from AS
100.

Configure an import routing policy on PE-2 to set a higher local preference value on the path learned from AS 200.

Configure an import routing policy on PE-2 to append the AS path attribute on the path learned from AS
100.

QUESTION 44
Exhibit:

Referring to the exhibit, what will the IS-IS cost be for R1 to reach R3?

301

310

QUESTION 45
Exhibit:

Referring to the exhibit, which two statements are true? (Choose two.)

The vrf-target configuration stops routes from being shared between CE-1 and CE-2.

The route-distinguisher configuration allows routes to be shared between CE-1 and CE-2.

The vrf-target configuration allows routes to be shared between CE-1 and CE-2.

The route-distinguisher configuration stops routes from being shared between CE-1 and CE-2.

QUESTION 46

Referring to the exhibit, there is a Layer 3 VPN setup that connects sites CE-A-1, CE-A-2, and CE-A-3 together. Host-1 can communicate with Host-3, but Host-1 cannot communicate with Host-2.
What must you do to solve the problem?

Change the route distinguisher in both routing instances to the same value.

Use the next-tableconfiguration statement for static routes in the corresponding routing instances.

Use BGP instead of static routing between the CE and PE devices.

Use the auto-exportcommand in both routing instances.

QUESTION 47
Which two types of LSAs have an area scope? (Choose two)

Type 2

Type 5

Type 11

Type 7

https://techhub.hpe.com/eginfolib/networking/docs/switches/5710/5200-4992_l3-ip-rtng_cg/content/517702239.htm

QUESTION 48
Exhibit:

The route shown in the exhibit is an example of which type of next-generation MVPN route?

Type 3 Selective MVPN autodiscovery route

Type 1 Intra-AS inclusive MVPN membership discovery

Type 2 Inter-AS inclusive MVPN membership discovery

Type 4 Selective MVPN autodiscovery route for leaf

QUESTION 49

Which three statements are true about the show pim joinoutput shown in the exhibit? (Choose three.)

This is a source-specific multicast stream.

The multicast receiver is still using the RP to receive the stream.

The multicast stream has been configured with a backup path to allow for fast reroute.

The multicast stream does not have an RP.

The shortest path to the source is through the RP.

QUESTION 50

A customer wants to reduce LSP flooding in their IS-IS network.
Which parameter should you change to accomplish this task?
[edit protocols isis]

user@router# set spf-options rapid-runs 5
[edit protocols isis interface <interface-name>]

user@router# set csnp-interval 65535
[edit protocols isis interface <interface-name>]

user@router# set lsp-interval 1000
[edit protocols isis interface <interface-name>]

user@router# set mesh-group <mesh-group-number>

QUESTION 51
Exhibit:

Referring to the exhibit, what will the IS-IS cost be for R1 to reach R3?

301

310

QUESTION 52
Exhibit:

Referring to the exhibit, which two statements are true? (Choose two.)

An AS loop will not exist between CE-1 and CE-2 and the BGP routes will be shared.

The CE-1 and CE-2 routes will have the same route distinguisher, which will stop the BGP routes from being shared.

An AS loop will exist between CE-1 and CE-2 and the BGP routes will not be shared.

The CE-1 and CE-2 routes will have the same route distinguisher, which will not stop the BGP routes from being shared.

QUESTION 53
Exhibit.

You have a Layer 3 VPN established between PE-1 and PE-2 to allow communication between CE-1 and CE-2 You want to establish communication between CE-1 and CE-2.
Referring to the exhibit, which statement is correct?

You will need a VRF import policy on PE-2 to advertise the OSPF routes learned from CE-2 through the Layer 3 VPN

You will need a VRF export policy on PE-2 to redistribute the OSPF routes learned from CE-2. through the Layer 3 VPN

You will need a BGP export policy on PE-1 to redistribute the OSPF routes learned from PE-2 to the CE1 BGP neighbor

You will need a VRF import policy on PE-1 to receive the OSPF routes learned from PE-2. through the Layer 3 VPN

QUESTION 54
Which two statements are correct about Opaque LSAs in OSPF? (Choose two )

Type 9 LSAs are used for graceful-restart and have link-local scope

Type 11 LSAs are used for MPLS label exchange and have link-local scope

Type 10 LSAs are used for MPLS traffic-engineering and have area scope.

Type 11 LSAs are used for MPLS traffic-engineering and have area scope

QUESTION 55
Exhibit:

You are troubleshooting an issue where R1 is no longer receiving the default IS-IS route from R3.
Referring to the exhibit, which action would you take to solve the problem?

Delete the protocols isis ignore-attached-bit configuration statement on R3.

Delete the protocols isis import configuration statement on R1.

Delete the protocols isis level 2 disable configuration statement on R3.

Delete the protocols isis ignore-attached-bit configuration statement on R1.

Loading …

The JN0-663 exam covers a wide range of topics related to service provider routing and switching. These topics include advanced routing protocols, multicast, virtual private networks (VPNs), and network automation. JN0-663 exam is designed to test the candidate’s knowledge and skills in these areas and ensure that they are able to configure, manage, and troubleshoot service provider networks using Juniper technology.

JN0-663 Dumps Full Questions – Exam Study Guide: https://www.actualcollection.com/JN0-663-exam-questions.html

Leave a comment Cancel reply