Unique Top-selling 300-515 Exams – New 2023 Cisco Pratice Exam [Q41-Q57]

Unique Top-selling 300-515 Exams – New 2023 Cisco Pratice Exam

CCNP Service Provider Dumps 300-515 Exam for Full Questions – Exam Study Guide

How to Prepare For Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam

Preparation Guide for Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam

Introduction

Cisco Systems , Inc., located in San Jose , California, in the heart of Silicon Valley, is an American multinational technology corporation. Cisco designs , produces and sells hardware , software, telecommunications equipment and other high-tech services and products for networking. Cisco specialises in unique tech markets, such as the Internet of Things ( IoT), domain security and energy management, through its various acquired subsidiaries, such as OpenDNS, Webex, Jabber and Jasper.

A world of opportunity is being created by Cisco technology. With Cisco’s Training and Certifications, one can power their career with a new learning portfolio that opens opportunities for developers as well as network engineers. A direct path to your technology career ambitions is provided by Cisco’s training and certification program. IT technologies are driving the transformation of Cisco’s training and qualification programs to prepare teachers, engineers, and developers of software for success in the most important positions in the industry.

Explore the power of the dynamic culture of the Cisco Learning Network to jump-start your certification and lifelong learning goals. Get useful tools for IT training for all Cisco certifications. Access research tools for IT certification, CCNA practise exams, IT wages and finding IT work.

This exam guide is intended to help you determine if you are able to complete the Implementing Cisco Service Provider VPN Services (300-515 SPVI) exam successfully. This guide includes information on the certification test target audience, recommended preparation and documentation, and a full list of exam targets, all with the intention of helping you obtain a passing grade. In order to increase your chances of passing the test, Salesforce strongly recommends a mix of on-the-job experience, course attendance, and self-study.

Q41. How do PE routers exchange CE routes between remote sites?

 by converting CE routes into VPNv4 routes and exchanging them using MP-BGP

 by establishing BGP neighbor relationships between all connected CEs to exchange routing information

 by learning IPv4 routes from connected CEs and redistributing them into the global IGP

 by converting CE routes into VPNv4 routes and exchanging them using the global IGP

Q42. While troubleshooting EoMPLS configuration problems, which three parameters should an engineer match between the two ends of the pseudowire configurations? (Choose three.)

 VLAN name

 Xconnect group name

 EFP subinterface number

 pseudowire ID

 MTU size

 control word usage

Q43. Which two are characteristics of using a non-MPLS peer-to-peer model over a traditional overlay model?
(Choose two.)

 The model is suited for nonredundant configurations.

 The configuration on a newly added site PE is updated automatically.

 Provider routers know the customer network topology.

 The customer specifies the exact site-to-site traffic profile.

 Routing information is exchanged between the customer router and one or a few PEs.

Reference:
http://etutorials.org/Networking/MPLS+VPN+Architectures/Part+2+MPLS-based+Virtual+Private
+Networks/Chapter+7.+Virtual+Private+Network+VPN+Implementation+Options/Overlay+and+Peer-to-peer
+VPN+Model/

Q44. Drag and drop the EVPN components from the left onto the correct planes on the right.

Reference:
https://www.cisco.com/c/dam/m/en_us/network-intelligence/service-provider/digital-transformation/knowledge-network-webinars/pdfs/0420-epn-ckn.pdf

Q45. In an Ethernet Virtual Circuit environment, which restriction do bridge domains have when STP is running?

 The STP mode must be RSTP or PVST+

 Bridge domains must be mapped to a different VLAN.

 The STP mode must be MSTP

 Bridge domains must belong to different MST instances.

Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/ce/b_ce_xe-313s- asr920-book/b_ce_xe-313s-asr920- book_chapter_01.html#reference_770349446ED24E83821EF701DDC46BFD

Q46. Refer to the exhibit.

An engineer is implementing an MPLS P2MP TE solution. Which type of router can serve as the midpoint router and the tailend router in this P2MP TE network implementation?

 headend

 source

 transit

 bud

Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/mpls/mp-te-path-setup-xe-3s-asr920-book/mp-te-path-setup-xe-3s-asr920-book_chapter_01.html

Q47. Which kind of traffic is supported in an MVPN Extranet?

 PIM dense mode with Reverse Path Forwarding

 PIM dense mode

 PIM sparse mode

 Bidirectional PIM

Q48. Refer to the exhibit.

A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)

 Configure PE3 to export route-targets 100:1 and 200:2.

 Configure PE3 to import route-targets 100:1 and 200:2.

 Configure PE4 to import route-targets 101:1 and 202:2.

 Configure PE2 to export route-targets 300:3 and 400:4.

 Configure PE1 to import route-targets 300:3 and 400:4.

Q49. Refer to the exhibit.

Router 1 is a route reflector client within a service provider core PE1 cannot see VPNv4 routes received from the ASBR PE1 only has an iBGP relationship with Router 1. Which action resolves this issue?

 Activate PE1 as a neighbor under the IPv4 address family.

 Configure Router 1 as a route reflector for PE1 under the VPNv4 address family.

 Configure PE1 to have an eBGP relationship with Router 1.

 Enable BGP default ipv4-unicast

Q50. In Layer 3 MPLS VPN implementations, if some of the VPNv4 routes on one PE router do not appear on another PE router, what could be the problem?

 RD mismatch between the PE routers

 RT export and import configuration errors

 VRF name mismatch between the PE routers

 RD export and import configuration errors

Section: Layer 3 VPNs
Explanation/Reference: http://blog.initialdraft.com/archives/1537/

Q51. Refer to the exhibit. Router 1 is a P router in the ISP MPLS core.
A connected P router cannot generate an MPLS label for the router 1 loopback0 interface.
Which action resolves this issue?

 The loopback0 interface must be in OSPF area 0.

 The network statement under the routing process must have a wildcard mask of 0 0.0 255.

 The OSPF network type must be changed on loopback0 to point-to-point

 A static route to null 0 must be added for the loopback interface and then static routes must be redistributed into OSPF

Q52. In an Ethernet Virtual Circuit environment, which restriction do bridge domains have when STP is running?

 The STP mode must be RSTP or PVST+

 Bridge domains must be mapped to a different VLAN.

 The STP mode must be MSTP

 Bridge domains must belong to different MST instances.

Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/ce/b_ce_xe-313s- asr920-book/b_ce_xe-313s-asr920- book_chapter_01.html#reference_770349446ED24E83821EF701DDC46BFD

Q53. Refer to the exhibit.

An engineer has configured router 1 to provide shared services to clients behind router 2. To complete the implementation so that routes from router 1 are accepted, what must the engineer configure on router 2?

 with import route targets 101:102 and 202:201

 with import route targets 201:202 and 401:402

 with export route targets 301:202 and 101:102

 with export route targets 201:202 and 401:402

Q54. Refer to the exhibit.

An engineer is trying to configure an EVPN VWPS. What is the issue with this configuration?

 The member in the VPWS context should be the PE-facing interface.

 The 12vpn evpn command should be instance 101.

 Interface GigabitEthernet0/1/0 should not have any IP address.

 The service instance and the EVPN instance are different.

Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l2_vpns/configuration/xe-3s/asr903/16-7-1/ b-mpls-l2-vpns-xe-16-7-asr900/epvn_vpws_single_homed.pdf

Q55. Which two are characteristics of using a non-MPLS peer-to-peer model over a traditional overlay model? (Choose two.)

 The model is suited for nonredundant configurations.

 The configuration on a newly added site PE is updated automatically.

 Provider routers know the customer network topology.

 The customer specifies the exact site-to-site traffic profile.

 Routing information is exchanged between the customer router and one or a few PEs.

Q56. Which tool identifies the point of failure in a P2MP LSP from the ingress LSR?

 Jitter TLV

 SPAN

 P2MP traceroute

 P2MP ping

Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-3/mpls/configuration/ guide/b-mpls-cg53x-asr9k/b-mpls-cg53x-asr9k_chapter_01000.html

Q57. Refer to the exhibit.

The CE router has established a BGP peering with the PE router, and the CE will use the core infrastructure of the PE as a backbone carrier to support CSC. Which additional task can you perform to complete the configuration?

 Configure static routing on the CE router.

 Configure the address-family ipv4 labeled-unicast command under the neighbor configuration of the CE router for the PE.

 Change the rd value to 65001:65001 under the VRF section of the PE router.

 Configure OSPF on the PE router.

 Loading …

Difficulty in Writing Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam

The Implementation of the Cisco Service Provider VPN Services (300-515) certification is one of the most important certifications that applicantes can have on their CV. One of the biggest challenges for many candidates is to use the Internet to find so many details that makes it impossible for them to believe, which would be beneficial for them to choose the correct materials for their tests.

The Cisco Service Provider VPN Services (300-515 SPVI) test is not simpler and unless well prepared, can prove to be a very tough exam. If competent 300-515 SPVI exam dumps are researched and evaluated on 300-515 SPVI practice exams, the exam difficulty can be overcommed.

However, applicants can clear the examination with the correct concentration and the correct preparatory material. ActualCollection have the most up-to-date 300-515 SPVI exam dumps that allow clear understanding of the pattern in questions raised by these dumping aspirants with real certification. The experts track qualification questions for all the changes in the course. Certification problems also require realistic research, which is an ideal forum to test the knowledge that is collected. For the study content, refer to the links below.

The Cisco exam called 300-515 SPVI concerns the implementation of Cisco VPN services for the Service Provider. It regards matters like Layer 2, Layer3, and IPv6. When one passes it, he or she will be awarded the CCNP Service Provider certificate.

Best way to practice test for Cisco 300-515: https://www.actualcollection.com/300-515-exam-questions.html

Related Links: myportal.utt.edu.tt www.stes.tyc.edu.tw myportal.utt.edu.tt www.stes.tyc.edu.tw www.stes.tyc.edu.tw myportal.utt.edu.tt