Appian ACD300 Exam Info and Free Practice Test ActualCollection [Q18-Q42]

NEW QUESTION 18
What are two advantages of having High Availability (HA) for Applan Cloud applications?

An Applan Cloud HA instance is composed of multiple active nodes running in different availability zones in differentregions.

Data andtransactions are continuouslyreplicated across the active nodes to achieve redundancy and avoid single points offailure.

A typical Appian Cloud HA instance is composed of two active nodes.

In the event of a system failure, your Appian instance will fie restored and available to your users in less than 15 minutes.having lost no more than the last 1minute worth of data.

NEW QUESTION 19
You are running an inspection as a part of the first deployment process from TEST to PROD. You receive a notice that one of your objects will not deploy because it is dependent on an object from an application owned by a separate team.
What should be your next step?

Create your own object with the same code base, replace (he dependent object in the application. and deploy to PROO.

Push a functionally viable package to PROD without the dependencies, and plan the rest o! the deployment accordingly with the other team’s constraints

Halt the production deployment and contact the other team tor guidance on promoting the object to PROD

Check the dependencies of the necessary object Deploy w PROO if there are few dependencies and it is low risk

NEW QUESTION 20
Your clients customer management application is finally released lo Production. After a few weeks of small enhancements and patches, the client Is ready to build their next application. The new application will leverage customer information from the first application to allow the client to launch targeted campaigns for select customers in order to increase sales.As part of the first application, your team had built a section lo display key customer information such as their name, address, phone number, how long they have been a customer, etc. A similar section will be needed on the campaign record you are building.
One of your developers shows you the new object they are working on for the new application and asks you to review it as they are running Into a few issues.
What feedback should you give?

Provide guidance to the developer on how to address the issues so that they can proceed with their work

Ask the developer to convert the original customer section into a shared object so it can be used by the new application

Point the developer to the relevant areas in the documentation or Applan Community where they can find more Information on the issues they are running into.

Create a duplicate version of that sect<on designed for the campaign record.

NEW QUESTION 21
Your Agile Scrum project requires you to manage two teams, with three developers per team. Both teams are to work on the same application In parallel.
How should the work be divided between the teams, avoiding issues caused by cross-dependency?

Have each team choose the stones they would like to work on based on personal preference

Group epics and stones by technical difficulty, and allocate one team the more challenging stories

Group epics and stones by feature, and allocate work between each team by feature.

Allocate stories to each team based on the cumulative years of experience of the team members.

NEW QUESTION 22
You are selling up a new cloud environment. The customer already has a system of record for Its employees and doesn’t want to re-create them in Appian. so you are going to Implement LDAP authentication.
What are the next steps to configure LDAP authentication?
To answer, move the appropriate steps from the Option list to the Answer List area, and arrange them in the correct order. You may or may not use all the steps.

NEW QUESTION 23
You are designing a process that is anticipated to be executed multiple times a day. This process retrieves data from an external system and then calls various utility processes as needed. The mam process will not use the results of the utility processes, and there are no user forms anywhere.
Which design choice should be used to start the utility processes and minimize the load on the execution engines?

Use the Start Process Smart Service to start the utility processes.

Start the utility processes via a subprocess synchronously.

Use Process Messaging lo star! the utility process.

Start the utility processes via a subprocess asynchronously

NEW QUESTION 24
Review the following resultof an explain statement:

Which two conclusions can you draw from this?

The request is good enough to support a high volume of data. but could demonstrate some limitations if the developer queries information related to the product

The worst join isthe one between the table order_detail and order.

The join between the tables order_detail, order and customerneeds to be tine-tuned due to indices.

The join between the tables 0rder_detail and productneeds to be fine-tuned due to Indices

The worst join is the one between the table order_detail and customer

Explanation
* D. The join between the tables order_detail and product needs to be fine-tuned due to Indices. This is correct because the result of the explain statement showsthat the join between these two tables has a high cost of 0.99, which indicates that it is inefficient and needs to be fine-tuned. One possible reason for the high cost is that there are no indices on the columns that are used for joining these two tables, which leads to a full table scan. Therefore, creating indices on these columns could improve the performance of this join.
* E. The worst join is the one between the table order_detail and customer. This is correct because the result of the explain statement shows that the join between these two tables has a very high cost of 1.00, which indicates that it is the worst join in terms of efficiency and needs to be fine-tuned. One possible reason for the high cost is that there are no indices on the columns that are used for joining these two tables, which leads to a full table scan. Therefore, creating indices on these columns could improve the performance of this join.
The other options are incorrect for the following reasons:
* A. The request is good enough to support a high volume of data, but could demonstrate some limitations if the developer queries information related to the product. This is incorrect because the request is not good enough to support a high volume of data, as it has two joins with very high costs that need to be fine-tuned. Moreover, querying information related to the product would not necessarily cause any limitations, as long as the join between order_detail and product is optimized.
* B. The worst join is the one between the table order_detail and order. This is incorrect because the result of the explain statement shows that the join between these two tables has a low cost of 0.01, which indicates that it is efficient and does not need to be fine-tuned.
* C. The join between the tables order_detail, order and customer needs to be fine-tuned due to indices.
This is incorrect because there is no such join between three tables in the result of the explain statement.
There are only two joins: one between order_detail and order, and another between order_detail and customer. Each of these joins needs to be fine-tuned separately due to indices.

NEW QUESTION 25
As part of an upcoming release of an application, a new nullable field is added to a table that contains customer dataThe new field is used by a reportin the upcoming release, and is calculated using data from another table.
Which two actions should you consider when creating the script to add the new field?

Create a script thatadds the held and leaves it null.

Create a rollback script that removes the field.

Create a script that adds the field and then populate it

Create a rollback script that clears the data from the field

Add a view that joins the customer data to the data used in calculation

NEW QUESTION 26
You are reviewing log files that can be accessed in Appian to monitor and troubleshoot platform-based issues.
For each type of log file, match the corresponding Information that it provides. Each description will either be used once, or not at all.
Note: To change your responses, you may deselect your response by clicking the blank space at the top of the selection list.

NEW QUESTION 27
You are required to create an integration from your Appian cloud instance to an application hosted within a customers self-managed environment.
The customers IT team has provided you with a REST API endpoint to test with; httpsV/lnternal networkVapi/api /ping Which recommendation should you make to progress this integration?

Expose the API as a SOAP-basedweb service.

Deploy the API / service into Appian Cloud

Add Appian Cloud’s IP address ranges lo the customer network’s allowed IP listing

Set up a VPN tunnel

NEW QUESTION 28
For each requirement, match the most appropriate approach to creating or utilizing plug-ins Each approach will be used once.
Note: To change your responses, you may deselect your response by clicking the blank space at the top of the selection list.

Explanation

Requirement: Read barcode values from images containing barcodes and QR codes. Correct approach: C.
Smart Service plug-in Exact explanation of correct approach taken from Appian Documentation: A smart service plug-in is a type of plug-in that allows you to create custom smart services that can be used in process models. A smart service can perform complex logic, interact with external systems, or manipulate data in Appian. A smart service plug-in can also leverage Java code to implement the functionality of the smart service. A smart service plug-in would be suitable for reading barcode values from images, as it can use Java libraries or APIs that can scan and decode barcodes and QR codes from image files. A smart service plug-in can also return the barcode values as outputs that can be used by other nodes or processes in Appian. A smart service plug-in can also be configured with input parameters, such as the image file, the barcode type, or the output format, that can customize the behavior of the smart service. A smart service plug-in can also have error handling and logging features that can handle any exceptions or failures that might occur during the barcode reading process.
Requirement: Display an externally hosted geolocation mapping applications interface within Appian to allow users of Appian to see where a customer (stored within Appian)is located. Correct approach: A. Web-content field Exact explanation of correct approach taken from Appian Documentation: A web-content field is a type of user interface component that allows you to display web content from an external source in a SAIL interface. A web-content field would be suitable for displaying an externally hosted geolocation mapping applications interface, as it can embed the web content in an iframe and render it within the Appian interface.
You can also pass parameters to the web content, such as the customer’s location, using the url parameter of the web-content field. A web-content field can also interact with other components in the Appian interface, such as buttons, grids, or forms, using the postMessage API. This way, you can create a seamless user experience that integrates the external geolocation mapping applications interface with the Appian functionality.
Requirement: Display an externally hosted geolocation mapping applications interface within Appian to allow users of Appian to select where a customer is located and store the selected address in Appian. Correct approach: A. Web-content field and C. Smart Service plug-in Exact explanation of correct approach taken from Appian Documentation: A web-content field and a smart service plug-in would be suitable for displaying an externally hosted geolocation mapping applications interface within Appian to allow users of Appian to select where a customer is located and store the selected address in Appian. A web-content field would be suitable for displaying the external geolocation mapping applications interface, as explained above. A smart service plug-in would be suitable for storing the selected address in Appian, as it can use Java code to receive the address data from the web content, validate it, and write it to a data store entity or a process variable.
Requirement: Generate a barcode image file based on values entered by users. Correct approach: B.
Component plug-in Exact explanation of correct approach taken from Appian Documentation: A component plug-in is a type of plug-in that allows you to create custom user interface components that can be used in SAIL interfaces. A component plug-in can also leverage Java code to implement the functionality of the component. A component plug-in would be suitable for generating a barcode image file, as it can use Java libraries or APIs that can encode values into barcode formats and generate image files. A component plug-in can also display the barcode image file in the Appian interface and allow users to download or print it. A component plug-in can also interact with other components in the Appian interface, such as text fields, buttons, or forms, using the a!refreshVariable() function. This way, you can create a dynamic user experience that updates the barcode image file based on the values entered by users.

NEW QUESTION 29
You are running an inspection as a part of the first deployment process from TEST to PROD. You receive a notice that one of your objects will not deploy because it is dependent on an object from an application owned by a separate team.
What should be your next step?

Create your own object with the same code base, replace (he dependent object in the application. and deploy to PROO.

Halt the production deployment and contact the other team tor guidance on promoting the object to PROD

Check the dependencies of the necessary object Deploy w PROO if there are few dependencies and it is low risk

Push a functionally viable package to PROD without the dependencies, and plan the rest o! the deployment accordingly with the other team’s constraints

NEW QUESTION 30
You are reviewing the Engine Performance Logs in Production for a single application thathas been live for six months. This application experiences concurrent user activity and has a fairly sustained load during business hours. The client has reported performance issues with the application during business hours.
During your investigation, you notice a high Work Queue – Java Work Queue Size value in the logs You also notice unattended process activities, including timer events and sending notifications emails, are taking far longer to execute than normal.
The client Increased the number of CPU cores prior to the application going live What is the next recommendation?

Add more engine replicas.

Optimize slow-performing user interfaces.

Add more application servers.

Add execution and analytics shards

NEW QUESTION 31
You are developing a case management application to manage support cases for a large set of sites. One of the tabs in this application s site Is a record grid of cases, along with Information about the site corresponding to that case. Users must be able to filter cases by priority level and status.
You decide to create a view as the source of your entity-backed record, which joins the separate case/site tables (as depicted in the following Image).

Which three column should be indexed?

site_id

status

name

modified_date

priority

case_id

NEW QUESTION 32
You ate in a backlog refinement meeting with the development team and the product owner. You review a story for an integration Involving a third-party system. A payload will be sent from the Appian system through the integration to the third-party system. The story is 21 points on a Fibonacci scale, and requires development from your Appian learn, as well as the technical resources from the third-party system. This item is crucial to your project s success.
What are the two recommended steps to ensure this story can be developed effectively?

Acquire testing steps from QA resources

Identify subject matter experts (SMEs) to perform user acceptance testing (UAT)

Maintain a communication schedule with the third-party resources

Break down the item into smaller stones

Leave a comment Cancel reply